Amazon A+ Content
| Modeļa versija | ||
|---|---|---|
| Modeļa versija | AP3600 Wall 1.0 | |
| CPU | ||
| CPU | CPU Details | 2.0 GHz Quad-Core |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 512 MB (4 Gbit) DDR3 | |
| Wireless | ||
| Wireless | MLO Speeds | 3570 Mbps |
| 5 GHz Wi-Fi Speed | 2882 Mbps | |
| 2.4 GHz Wi-Fi Speed | 688 Mbps | |
| 5 GHz Wi-Fi Streams | 3 Spatial Streams | |
| 2.4 GHz Wi-Fi Streams | 2 Spatial Streams | |
| Wi-Fi Antennas | 5× Internal | |
| FEM or PA/LNA | 5 GHz: 3× Internal, 2.4 GHz: 2× Internal | |
| Beamforming | ||
| Range Performance |
Max: 180 m (591 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
| Interfaces | ||
| Interfaces | 2.5G RJ45 Ports | 2 |
| Gigabit RJ45 Ports | 3 | |
| Ethernet Notes | ETH0: PoE In, LAN1: PoE OUT* (*See Power Section) | |
| Buttons and LEDs | ||
| Buttons and LEDs | LED | System |
| Physical Buttons | Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi) | |
| Power | ||
| Power | Power Input Type | PoE via Ethernet Port |
| Power Methods |
|
|
| Power Input |
|
|
| Power Output | PoE on LAN1: PoE Passthrough (the output voltage equals the input voltage range 42.5–57V) | |
| Max Power Consumption (W) | 12W (48V PoE) | |
| Idle Power Consumption (W) | 5W (48V PoE) | |
| Max Power Output (W) | 13.5W | |
| Note | The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page. | |
| Reliability | ||
| Reliability | Advanced | Hardware Watchdog |
| EMC | ESD: Contact: 4kV; Air: 8kV | |
| Environment |
Operating Temperature: 0 ℃ ~ 40 ℃ (14 ℉ ~149 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation | Wall-mount |
| Dimension |
143×86×27.6 mm 5.63×3.39×1.09 inches |
|
| Package Content | ||
| Package Content |
|
|
| Ordering Information | ||
| Ordering Information | Retail Package Dimension |
152×39.5×90 mm 5.98×1.56×3.54 inches |
| Units per Carton | 30 | |
| Carton Dimension |
32.8×22×29.6 cm 12.91×8.66×11.65 inches |
|
| Compatibility | ||
| Compatibility | Compatible Products | C200P 1.0, C500P 1.0 |
| Compatible Accessories | POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0 | |
- Faktiskā bezvadu datu caurlaides spēja var atšķirties atkarībā no tīkla apstākļiem, klienta ierobežojumiem un vides faktoriem, tostarp ēkas izkārtojuma, šķēršļiem un klienta atrašanās vietas.
- Cudy AP Controller is required to enable this feature.
- Prasība par bezvadu pārklājumu kalpo tikai kā atsauce. Pārklājuma veiktspēja var atšķirties atkarībā no vides faktoriem, tostarp ēku izvietojuma, šķēršļiem, satiksmes intensitātes un blīvuma, kā arī ierīces atrašanās vietas. Lai nodrošinātu optimālu pārklājumu, novietojiet ierīci centrālajā vietā teritorijā, kurā nepieciešams Wi-Fi.
- Vairāku ierīču faktisko veiktspēju var ietekmēt izmantoto lietojumprogrammu veidi, kopējais pieejamais joslas platums un ierīču iespējas. Vecāku Wi-Fi ierīču (novecojušu standartu) pieslēgšana var samazināt kopējo efektivitāti. Lai izmantotu efektivitātes funkcijas, nepieciešamas saderīgas klienta ierīces, kas arī atbalsta šīs funkcijas. Plašāku informāciju par atbalstītajām efektivitātes funkcijām skatiet specifikācijas izklājlapas sadaļā Programmatūra.