Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1319 comments
@Dear STERGIOS,
Please update to the 2.4.19 first. Then try again.
“I have M3000 version 2 with Serial number code start with M30002521 EU.20 Can’t flash to OpenWrt firmware cudy_m3000-v1-sysupgrade_20251119.bin “File is invalid. Please retry.””
I have M3000 version 2 with Serial number code start with M30002521 EU.20 Can’t flash to OpenWrt firmware cudy_m3000-v1-sysupgrade_20251119.bin “File is invalid. Please retry.”
@Dear Bourn,
OK. I will upload it to the Google Drive.
“Hello Cudy Support,
Thank you very much for your help. I have received the intermediate firmware, then successfully flashed AP1300 Outdoor v1 OpenWrt firmware on my AP1300 v1.0 device. Everything works correctly, and there is no need to build a custom firmware anymore.
Please consider uploading the intermediate firmware you provided to a public location (for example, Google Drive or your download center). This would help many users configure and migrate their devices more easily.
Thank you again for your support."
Hello Cudy Support,
I have sent you the custom firmware built for Cudy AP1300 v1.0, and I can confirm that it also works correctly on AP1300 Outdoor v1.0 access points.
https://downloads.openwrt.org/snapshots//targets/ramips/mt7621/openwrt-ramips-mt7621-cudy_ap1300-outdoor-v1-squashfs-sysupgrade.bin
Hello Cudy Support,
Thank you very much for your help. I have received the intermediate firmware, then successfully flashed AP1300 Outdoor v1 OpenWrt firmware on my AP1300 v1.0 device. Everything works correctly, and there is no need to build a custom firmware anymore.
Please consider uploading the intermediate firmware you provided to a public location (for example, Google Drive or your download center). This would help many users configure and migrate their devices more easily.
Thank you again for your support.