Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1319 comments
Can you email me the signed intermediate OpenWRT firmware for WR3000S?
Thanks.
Is it possible to upload OpenWRT to the WR3000S router ? where can i find image and instructions.
@mike_ds,
Dear Customer,
Thank you for contacting Cudy support team.
The letter says that it will be impossible to return to the manufacturer’s firmware after switching to Openwrt. —No, you can return to the manufacturer’s firmware after switching to Openwrt via the TFTP method.
Tell me, is the Openwrt firmware that you sent stable? --This is not the OpenWrt firmware, this is just a intermediate firmware.
For the functions of the Openwrt firmware, you need to check it by yourself, we don’t know that. It is not developed by Cudy.
“Dear manufacturers. I want to install Openwrt on my Cudy AP3000 v1.0 access point (round with 2.5G port). You recently sent me the firmware by email – I am very grateful to you for your quick response. The letter says that it will be impossible to return to the manufacturer’s firmware after switching to Openwrt. What is the reason for this impossibility of returning to the factory? Tell me, is the Openwrt firmware that you sent stable? Will I regret this transition? Will the firmware have VLAN and Multi-SSID network management for wireless adapters, does PoE and the 2.5G port work in Openwrt? It is important for me to know the stability and performance of the Openwrt firmware before I transfer the AP3000 v.1.0 to a firmware from which it will then be impossible to return to factory settings. When the access point starts on the factory firmware, I see in the address line a reference to the luci interface, that is, similar to Openwrt, but modified by your development team. Therefore, I do not understand why it is impossible to switch back to the factory, in case of failure.”
Dear manufacturers. I want to install Openwrt on my Cudy AP3000 v1.0 access point (round with 2.5G port). You recently sent me the firmware by email – I am very grateful to you for your quick response. The letter says that it will be impossible to return to the manufacturer’s firmware after switching to Openwrt. What is the reason for this impossibility of returning to the factory? Tell me, is the Openwrt firmware that you sent stable? Will I regret this transition? Will the firmware have VLAN and Multi-SSID network management for wireless adapters, does PoE and the 2.5G port work in Openwrt? It is important for me to know the stability and performance of the Openwrt firmware before I transfer the AP3000 v.1.0 to a firmware from which it will then be impossible to return to factory settings. When the access point starts on the factory firmware, I see in the address line a reference to the luci interface, that is, similar to Openwrt, but modified by your development team. Therefore, I do not understand why it is impossible to switch back to the factory, in case of failure.
@Toni and Ian,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you via email. Please check.