Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1319 comments
@Tadeusz
Dear Customer.
Thank you for contacting Cudy support team.
The new IP address of the router after update the intermediate firmware is 192.168.1.1 255.255.255.0, please try again. If still can’t login to the web page. Please try to recover the firmware to Cudy firmware according to the instruction on the website.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=75e4fd020&ss=r
Then update the OpenWrt firmware again.
“Hi Cudy Support,
I followed your manual – First update the intermediate firmware from GoogleDrive to remove signature. Second Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1.
I uploaded intermediate via GUI. My router WR3000s rebooted itself. Now only system LED is turned on and WAN and LAN1. I cannot get via any 192.168.×.×.
Could you help in this case, please?
Regards,
Tadeusz”
It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.
@Paco,
Dear Paco Mercado,
Thank you for contacting Cudy support team. For now we don’t have plan to develop OpenWrt firmware. We will provide feedback to the R&D department for evaluation.
“Wouln’t make more sense if Cudy would contribute to the OpenWRT project directly?
Your firmware is based on OpenWRT, so it would be a way to give back to the community and, also, facilitate a path for us, non tech-savy people, to use more up to date versions.
I understand you might want to keep you “secret sauce” under wraps, but if there’s a will, there’s a way…”
,
Thank you for contacting Cudy support team. For now we don’t have plan to develop OpenWrt firmware. We will provide feedback to the R&D department for evaluation.
“Wouln’t make more sense if Cudy would contribute to the OpenWRT project directly?
Your firmware is based on OpenWRT, so it would be a way to give back to the community and, also, facilitate a path for us, non tech-savy people, to use more up to date versions.
I understand you might want to keep you “secret sauce” under wraps, but if there’s a will, there’s a way…”
@Denis,
Dear Denis,
The AP3000 doesn’t support to recover to Cudy firmware via TFTP now. We have plan to add this feature in future.
“Hello Cudy team,
I found that VLAN support in Cudy AP3000 is not up to the features I expected from business-oriented device (unfortunately after purchase). I would like to switch to OpenWrt (it now supports AP3000) to see if it can be done with that OS. But I found out that it will be impossible to recover to Cudy firmware, because tftp restore is not available in this AP. Do you have plans to resolve this issue with firmware update, or it is limited in hardware? Should I better return this AP and give up?"
@Tadeusz
Dear Tadeusz,
Yes, you are right. First update the intermediate firmware from GoogleDrive to remove signature. Second Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1.
“Hello my friend,
I was looking forward the latest OpenWrt 24.10.0 stable version. Finally it was released. I would like to upload it into my Cudy WR3000S v1. Should I follow your instruction above:
1/ Remove signature check from GoogleDrive.
2/ Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1
or
to be 100% sure download OpenWrt from Cudy’s official website (but cannot find it yet)?
Regards,
Tadeusz"