Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1319 comments
@Dear Anders F,
Maybe there is something wrong with the hardware. Please contact the seller to request a replacement and try again.
“Yes. I downloaded and unzipped “AP3000 V1.0.zip”, which contains ’cudy_ap3000-v1-sysupgrade_20260224.bin. Flashing that though the UI resulted in resulted in an infinite boot cycle (The AP showed a read light, blinking white/light blue every 10 seconds), which I recovered using TFTP using cudy stock image.
“If the file name of the intermediate firmware is “cudy_ap3000-v1-sysupgrade_20260224.bin”?""
Yes. I downloaded and unzipped “AP3000 V1.0.zip”, which contains ’cudy_ap3000-v1-sysupgrade_20260224.bin. Flashing that though the UI resulted in resulted in an infinite boot cycle (The AP showed a read light, blinking white/light blue every 10 seconds), which I recovered using TFTP using cudy stock image.
“If the file name of the intermediate firmware is “cudy_ap3000-v1-sysupgrade_20260224.bin”?"
@Уважаемый dima,
На данный момент прошивки OpenWRT для WR1300E V2.0 нет.
“Доброго дня. Хотел прошить WR1300E V2.0 на openwrt. Но при попытке загрузить прошивку с GDrive получаю ошибку “Файл заблокирован. Пожалуйста, повторите попытку.” Подскажите как обновиться.”
@Уважаемый Юрий,
Что вы делали с прошивкой? Кроме того, распаковывали ли вы файл прошивки перед обновлением?
“добрый день скажите пожалуйста почему не грузиться последняя официальная прошивка для cuddy tr3000 v1”
@Dear Anders,
If the file name of the intermediate firmware is “cudy_ap3000-v1-sysupgrade_20260224.bin”?
“Hello,
Model: Cudy AP3000
Hardware Version: V1.1 (EU)
Current firmware: 2.4.7-20260115
I tried flashing the AP3000 V1.0 OpenWrt intermediate firmware from your Google Drive, but the device entered a boot loop (red LED with periodic white blink) and had to be recovered via TFTP.
It seems my device is a newer AP3000 V1.1 EU variant that requires a different OpenWrt transition firmware.
Could you please provide the correct OpenWrt intermediate (transition) firmware for AP3000 V1.1 (EU, 2026 firmware branch)?
Thank you."