Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1319 comments
Hello Cudy Support Team,
I have a Cudy TR3000 v1.0 router and would like to install OpenWrt on it.
Device details:
- Model: TR3000 v1.0
- Serial Number: S0006956260910307
- Current stock firmware version: 2.4.22-20251113-125907
Could you please:
1. Confirm which flash chip my unit uses (F50L1G41LB or F50L1G41LC) and the flash size (128 MB or 256 MB), based on the serial number above.
2. Send me the Cudy-signed OpenWrt intermediate firmware compatible with my hardware revision, so I can install OpenWrt without bricking the device.
Thank you in advance!
Best regards,
Astemir
@Dear Ilya,
Our technical support has sent you the firmware via email. Please check.
“Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya"
Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya
@Dear Connect Pro,
Our technical support has contacted you via email. Please check.
“Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!”
Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!