Ubrīdinājumi
Šajā tīmekļa vietnē ir uzskaitīta ierīču programmatūra, kas atbalsta OpenWrt sistēmu, pirms lejupielādējiet un instalējiet programmatūru, lūdzu, ņemiet vērā, ka OpenWrt projekts ir Linux operētājsistēma, kas paredzēta iegultajām ierīcēm. Tā vietā, lai mēģinātu izveidot vienotu, statisku programmaparatūru, OpenWrt nodrošina pilnībā rakstāmu failu sistēmu ar pakešu pārvaldību. Tas atbrīvo jūs no ražotāja nodrošinātās lietojumprogrammu atlases un konfigurācijas un ļauj jums pielāgot ierīci, izmantojot paketes, lai tā atbilstu jebkurai lietojumprogrammai. Izstrādātājiem OpenWrt ir ietvars, kas ļauj izveidot lietojumprogrammu bez nepieciešamības ap to veidot pilnu programmaparatūru; lietotājiem tas nozīmē iespēju pilnībā pielāgot ierīci, lai to izmantotu tā, kā nekad nav iedomājušies.
Apraksts
- Šo failu var izmantot tikai tad, ja maršrutētājs darbojas ar Cudy tīmekļa lietotāja saskarni .
- Ja maršrutētājs jau darbojas ar OpenWRT UI, lietotājam vispirms jāatjauno to uz Cudy oficiālo firmware. Un pēc tam atjaunināt maršrutētāju ar šo programmaparatūru. .
- Kā atjaunot maršrutētāju uz Cudy oficiālo programmaparatūru? Lūdzu, izlasiet lejupielādētajā failā esošo readme. .
Garantija:
Cudy ar šo paziņo
- Mēs, Cudy, neuzņemamies garantiju attiecībā uz programmatūru, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Mēs neuzņemamies nekādas garantijas produktiem, kuros ir instalēta jebkāda programmatūra, ko nav izlaidusi Shenzhen Cudy Technology Co., Ltd. .
- Ja jums ir nepieciešams izmantot openwrt programmatūru, iesakām to lejupielādēt no Cudy oficiālās vietnes. .
Saņemiet OpenWrt programmaparatūru, lai noņemtu paraksta pārbaudi: Drive
OpenWrt firmware meklētājs (nav izlaists Cudy): OpenWrt Firmware Selector
1530 komentāru
Hello Cudy Support,
I have a Cudy WR3000H V1.0 (EU).
Router information:
Model: WR3000H_EU V1.0
Serial Number: WR3000H254300*** EU 1.0
Stock Firmware: 2.4.5 US
I would like to install the official OpenWrt firmware.
I understand that routers with SN 2543 or later require the new OpenWrt intermediate firmware for the F50L1G41LC flash.
I found the intermediate firmware:
cudy_wr3000h-v1-sysupgrade_20251119.bin
However, I understand that some WR3000H units with the F50L1G41LC flash and Motorcomm YT8821 WAN PHY report “File is invalid” when using this image.
Could you please provide me with the correct Cudy-signed OpenWrt intermediate firmware specifically compatible with my hardware revision?
I would then like to upgrade to an official OpenWrt version 24.10.5 or newer.
If you were in my shoes, would you buy a product from a company that doesn’t respond? I was planning to order another item, but unfortunately, I will not buy—nor let anyone around me buy—anything else from a company that fails to reply. Definitely do not buy anything from the Cudy brand; I certainly won’t buy from them again, and I’m going to post about this on every forum.
Cudy x6 v2
Hi, I bought a Cudy X6 v2, but it doesn’t have 5GHz FCC channels. Could you please send me the US firmware? I would really appreciate it. Thank you.
TR3000-256MB EAEU1.0 — request for intermediate firmware and recovery file
Hello Cudy Support,
I sent this request to support@cudy.com on September 28 and again on September 29 (full S/N included in the emails), but have not received a reply yet, so I am posting here as well.
- Model: TR3000-256MB, EAEU1.0
- Production week in S/N: 2623
- Current stock firmware: 2.5.27-20260804-190139
I have NOT flashed anything yet. Another TR3000 256MB owner (S/N week 2626) reported on your recovery FAQ page on September 26 that the router stopped booting after flashing the intermediate firmware from the TR3000-256MB download page (DTS_and_intermediate_firmware, May 2025) on top of stock 2.5.21. My stock firmware is even newer and is not listed on the download page, so I want to confirm compatibility before flashing.
Could you please send me by email:
1. The intermediate firmware confirmed to work with my unit and stock 2.5.27.
2. The stock firmware for TFTP recovery (recovery.bin), ideally 2.5.27.
3. Which NAND flash chip is used in TR3000-256MB units from this batch.
4. Which OpenWrt image to install afterwards (cudy_tr3000-256mb-v1-squashfs-sysupgrade.bin from OpenWrt 25.12.x?).
Thank you!
Cudy x6 v2
Hi, I bought a Cudy X6 v2, but it doesn’t have 5GHz DFS FCC channels. Could you please send me the US firmware? I would really appreciate it. Thank you.