1. Lejupielādējiet jaunāko programmaparatūru no Saņemšanas centra.
2. Izaizzipējiet lejupielādēto failu
3. Ieslēdziet Cudy ierīci, pagaidiet, līdz LED indikators kļūst stabils.
4. Pievienojieties Cudy tīklam, izmantojot WiFi vai Ethernet.
5. Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1.
Sīkāku informāciju skatīt Kā pieteikties Cudy Router tīmekļa saskarnē?"
6. Atjauniniet programmaparatūru.
a. Paplašinātie iestatījumi -> Firmware, izvēlieties izaizzipēto programmaparatūru, ko augšupielādēt.
b. Vispārējie iestatījumi->Firmware lapā var veikt tiešsaistes atjaunināšanu un vietējo atjaunināšanu.
Piezīme: Atbalsta tikai programmaparatūru 2.x.x vai jaunāku.
7. 5 minūtes jāgaida, līdz maršrutētājs tiks restartēts.
173 comments
@Dear Steve,
Our technical support has contacted you via email. Please check.
“The edge device is a Huawei GPON terminal configured in bridge mode and the model is NP2035G.
The edge device is a Huawei GPON terminal configured in bridge mode and the model is NP2035G.
@Dear Steve,
I mean the terminal that is connected to the P5.
“This is a cudy P5 router version 1.0.”
This is a cudy P5 router version 1.0.
@Dear Steve,
It is possible. But there is no other feedback about this issue. May be a compatible issue with specific terminal. We will try to test it. What is the brand and model of the terminal?
“Hi support team,
I confirm that past thursday I replaced the power adapter with a 12V 4A one, updated the firmware to version 2.4.25, and re-enabled 802.11ax on the Cudy P5 router. Interestingly, I noticed that today, after being active for 17 hours, the router restarted after having been up and running for 7 days the wifi config 802.11ac on 5Ghz band without any issues.
Therefore, I reconfigured 802.11ac on the 5GHz band and 802.11n on the 2.4GHz band on the Cudy router to see how the service behaves.
My question is, could this be related to a bug with 802.11ax on 5Ghz band?"