1. Lejupielādējiet un atinstalējiet failu no šeit.
2. Lejupielādējiet jaunāko programmaparatūru no oficiālās tīmekļa vietnes un pārdēvējiet to par 'recovery.bin'. Piezīme: Jums tas jāieliek tajā pašā Tftpd rīku failā.
3. Izslēdziet maršrutētāju. Atvienojiet strāvas adapteri vai nospiediet POWER pogu.
4. Savienojiet datoru ar maršrutētāja LAN portu, izmantojot Ethernet kabeli.
5. Manuāli konfigurējiet datora IP adresi "192.168.1.88".
6. Palaidiet 'tftp32.exe'.
7. Komandu rindā izpildiet 'netsh advfirewall set allprofiles state off', lai atspējotu Windows ugunsmūri, pretējā gadījumā tftp tiks bloķēts. Vai arī varat atspējot ugunsmūri datora vadības panelī. Kā parādīts tālāk.
8. Nospiediet "Atjaunināt" pogu/aizvērtni un turiet to. Pirms maršrutētājs tiek ieslēgts un pirms tftp sāk lejupielādēt programmaparatūru, neatlaidiet 'Reset' pogu/caurumu.
9. Ieslēdziet maršrutētāju.
10. Kad visas lampiņas ātri mirgo vai kad tftp sāk lejupielādēt programmaparatūru, varat atlaist "Reset" pogu/durvīti.
11. Kad lampiņa lēni mirgo, atjaunināšana ir pabeigta.
12. Lūdzu, atjaunojiet datora IP adresi, lai tā būtu dinamiskais IP.
13. Gatavs.
258 comments
Sadly this does not work with my TR3000:
1. The download link (for tftp32?) is broken/does not work.
2. It doesn’t say where to put the sysupgrade firmware after download.
3. Does the sysupgrade firmware have to be renamed (to “recovery.bin”)?
Actually the stock vendor firmware for me is better/easier than open-wrt. So it should be possible to reflash to stock fw.
@Chris,
Thank you for you help. I have sent the method “connect to the WAN port” to Ivan.
“Hi Team, I can answer myself; got it running to flash back to Cudy FW for a TR1200 by connecting to the WAN (!) Port on Cudy; not the LAN port. That was the only thing different for TR1200 compared to the the description above”Hi Team, I can answer myself; got it running to flash back to Cudy FW for a TR1200 by connecting to the WAN (!) Port on Cudy; not the LAN port. That was the only thing different for TR1200 compared to the the description above
Hi Cudy support, I do have the same issue as Ivan for TR1200.
I could download the TFTP32 for windows and follow all the steps above; but does not work to update / downgrade to original Cudy FW. Can you help?
@Stev0,
Our technical support has sent you the solutions via email. Please check.
“I recently bought a 3-pack M1800 Mesh set. I wanted try OpenWRT and flashed the firmware on all 3 M1800 units. It worked fine. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware.”