1. Lejupielādējiet un atinstalējiet failu no šeit.
2. Lejupielādējiet jaunāko programmaparatūru no oficiālās tīmekļa vietnes un pārdēvējiet to par 'recovery.bin'. Piezīme: Jums tas jāieliek tajā pašā Tftpd rīku failā.
3. Izslēdziet maršrutētāju. Atvienojiet strāvas adapteri vai nospiediet POWER pogu.
4. Savienojiet datoru ar maršrutētāja LAN portu, izmantojot Ethernet kabeli.
5. Manuāli konfigurējiet datora IP adresi "192.168.1.88".
6. Palaidiet 'tftp32.exe'.
7. Komandu rindā izpildiet 'netsh advfirewall set allprofiles state off', lai atspējotu Windows ugunsmūri, pretējā gadījumā tftp tiks bloķēts. Vai arī varat atspējot ugunsmūri datora vadības panelī. Kā parādīts tālāk.
8. Nospiediet "Atjaunināt" pogu/aizvērtni un turiet to. Pirms maršrutētājs tiek ieslēgts un pirms tftp sāk lejupielādēt programmaparatūru, neatlaidiet 'Reset' pogu/caurumu.
9. Ieslēdziet maršrutētāju.
10. Kad visas lampiņas ātri mirgo vai kad tftp sāk lejupielādēt programmaparatūru, varat atlaist "Reset" pogu/durvīti.
11. Kad lampiņa lēni mirgo, atjaunināšana ir pabeigta.
12. Lūdzu, atjaunojiet datora IP adresi, lai tā būtu dinamiskais IP.
13. Gatavs.
249 comments
@Dear Hans,
Sorry, we don’t offer this help as you said.
“Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.”
Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.
Dear Angel,
Yes, you can do it. Please follow the steps on this instruction to do it.
“Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?”
Nevermind i found it!It was the wan port ! 1.Download tftp64.exe extract it put the firmware of the TR1200 renamed recovery in to the same extracted folder open the program don’t mess anything interface leave it close fw if you have windows press the reset button and hold it put the power and when the light starts flash quick leave it the program will send it u don’t have to look at the program look at led light of cudy TR1200.
Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?