1. Lejupielādējiet un atinstalējiet failu no šeit.
2. Lejupielādējiet jaunāko programmaparatūru no oficiālās tīmekļa vietnes un pārdēvējiet to par 'recovery.bin'. Piezīme: Jums tas jāieliek tajā pašā Tftpd rīku failā.
3. Izslēdziet maršrutētāju. Atvienojiet strāvas adapteri vai nospiediet POWER pogu.
4. Savienojiet datoru ar maršrutētāja LAN portu, izmantojot Ethernet kabeli.
5. Manuāli konfigurējiet datora IP adresi "192.168.1.88".
6. Palaidiet 'tftp32.exe'.
7. Komandu rindā izpildiet 'netsh advfirewall set allprofiles state off', lai atspējotu Windows ugunsmūri, pretējā gadījumā tftp tiks bloķēts. Vai arī varat atspējot ugunsmūri datora vadības panelī. Kā parādīts tālāk.
8. Nospiediet "Atjaunināt" pogu/aizvērtni un turiet to. Pirms maršrutētājs tiek ieslēgts un pirms tftp sāk lejupielādēt programmaparatūru, neatlaidiet 'Reset' pogu/caurumu.
9. Ieslēdziet maršrutētāju.
10. Kad visas lampiņas ātri mirgo vai kad tftp sāk lejupielādēt programmaparatūru, varat atlaist "Reset" pogu/durvīti.
11. Kad lampiņa lēni mirgo, atjaunināšana ir pabeigta.
12. Lūdzu, atjaunojiet datora IP adresi, lai tā būtu dinamiskais IP.
13. Gatavs.
162 comments
@Dear Will,
TR1200 is different with other models. You must connect your computer to the WAN port of TR1200 when recovering. Please have a try.
“Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?”
Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?
@Dear spartak,
Please check the steps carefully one by one and try again.
“Cudy X6 (AX1800) v2
how to return to official firmware from OpenWRT?
From local 192.168.1.88 not download firmware”
Cudy X6 (AX1800) v2
how to return to official firmware from OpenWRT?
From local 192.168.1.88 not download firmware
@Dear Pablo,
The method that recover the WR1500 is different. Please follow the instruction I sent your email box.
“Hello, I have a problem with the WR1500. It updated to the latest firmware from 2.3.3 to 2.3.10 and now the router is no longer responding. The LED stays red and the router restarts. I tried tftp recovery on the WAN and LAN ports, but nothing happened.
I hope you can help me. Thank you very much.”