Pierakstīšanās:
1. Uzstādiet antenas un novietojiet tās uz augšu.
2. Ievietojiet SIM karti slotā, līdz atskan klikšķis.
3. Savienojiet strāvas adapteri ar maršrutētāju un ieslēdziet to.
1.solis: Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1. Ievadiet administratora paroli, lai pieteiktos.
Piezīme:No noklusējuma administratora parole ir "admin", ja programmaparatūras versija ir 1.X.X.X. No programmaparatūras versijas 2.X.X. esam atcēluši noklusējuma administratora paroli. Jums ir jāizveido administratora parole, pirmo reizi pieslēdzoties.
Sīkāku informāciju skatīt Kā pieteikties Cudy maršrutētāja tīmekļa saskarnē?"
2. solis: Atvērsies ātrās iestatīšanas logs, izvēlieties savu "Laika zonu".
3. solis: Konfigurējiet APN parametrus. Lielākoties mums ir nepieciešams tikai saglabāt APN profilu kā " Auto". Pēc tam noklikšķiniet uz "Nākamais". Maršrutētājs automātiski izvēlēsies APN parametrus. (Ieteicams)
Ja vēlaties pielāgot APN parametrus. Varat izvēlēties APN profilu kā " Manuālais" un ievadīt pareizos APN parametrus.
<Piezīme: Ja neesat pārliecināts par APN parametriem, sazinieties ar savu interneta pakalpojumu sniedzēju.
4. solis: Noteikt bezvadu tīkla nosaukumu un paroli vai saglabāt tos kā noklusējuma.
<5. solis: Noklikšķiniet uz "Save & amp; Apply", lai pabeigtu konfigurāciju.
<6. solis: Kad statuss ir Savienots, varat izmantot internetu.
<
34 comments
@Hallo Michael, bitte versuchen Sie Folgendes:
1. Aktualisieren Sie bitte zuerst die Firmware Ihres P4 auf Version 2.4.20.
https://www.cudy.com/pages/download-center/p4-1-0
2. Setzen Sie den Router bitte auf die Werkseinstellungen zurück.
3. Ist Ihre SIM-Karte mit einer PIN geschützt? Falls ja, können Sie sich auf der Webseite Ihres Routers P4 anmelden und die PIN erneut eingeben.
4. Sollte das Problem weiterhin bestehen, laden Sie bitte die Diagnosedatei (BIN-Datei) unter „Diagnosetools“ → „Diagnose“ → „Los“ → „Download“ herunter und senden Sie mir die Datei.
“Hallo und guten Tag, es ist mir leider nicht möglich mit meinem Cudy P4 eine Internetverbindung herzustellen. Sim- Status wechselt zwischen Sim bereit und Initialisieren. Wo könnte das Problem noch liegen ? Hab schon alles mögliche seit Stunden versucht. Neueste Firmware ist installiert. MfG Michael”
Hallo und guten Tag, es ist mir leider nicht möglich mit meinem Cudy P4 eine Internetverbindung herzustellen. Sim- Status wechselt zwischen Sim bereit und Initialisieren. Wo könnte das Problem noch liegen ? Hab schon alles mögliche seit Stunden versucht. Neueste Firmware ist installiert. MfG Michael
@Dear Sakai,
You can set the metric of the WAN connection. The small the metric, the higher priority the WAN connection.
For the new firmware, it is under development currently. We will release a new firmware in the near future.
“R700 V1.0
I bought this router recently and this has never received any firmware update since its release date. Can you guys work on its latest firmware? Currently, we are unable to put multiple IP ranges when making a rule set to route specific data through a specific WAN.
Also, the rule is not applying properly sometimes. In the policy tab, you can not give priority to a specific WAN. Please fix these."
R700 V1.0
I bought this router recently and this has never received any firmware update since its release date. Can you guys work on its latest firmware? Currently, we are unable to put multiple IP ranges when making a rule set to route specific data through a specific WAN.
Also, the rule is not applying properly sometimes. In the policy tab, you can not give priority to a specific WAN. Please fix these.
@Dear Tommy,
Generally, there is no need to set the router. Just connect the devices to the LAN ports of the router. Then it will work. You can try to reset the router to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes. Then connect all the devices and check if the problem avoided?
In addition, please check if the CCTV camera is set to get the IP address via DHCP when connect to the router via wired cable? If not, please set it.
“Dear Cudy team. How should I configure your router lt500D to be able to connect two CCTV cameras via Ethernet cable? I was able to connect only one that supports wifi, second one can be connected only via cable. Your router does not see these devices in lan network.”