Bieža tīkla topoloģija:
1.solis: Izvelciet diapazona pagarinātāju sienas kontaktligzdā un pagaidiet, līdz stabili iedegas barošanas indikators.
Piezīme:
1. Kad iestatāt Range Extender, novietojiet to tuvāk galvenajam maršrutētājam.
2. ATJAUNOJIET Range Extender standarta iestatījumus, lai izvairītos no saskarnēm.
2. solis: Pievienojieties Range Extender noklusējuma Wi-Fi, kas ir atvērts Wi-Fi.
3. solis: Atveriet tīmekļa pārlūkprogrammu un ievadiet http://cudyre.net/ vai http://192.168.10.254/ adreses joslā.
Nākamajā lapā parādīsies zemāk redzamā pieteikšanās lapa. Izvēlieties tīmekļa pārvaldības lapas displeja valodu un pieprasītā parole ir 'admin' vai arī ir nepieciešams izveidot vienu paroli.
4. posms: Atvērsies ātrās iestatīšanas logs, izvēlieties "Bezvadu paplašinātājs", pēc tam dodieties uz "Tālāk".
5. solis: Izvēlieties savu "Laika joslu".
6. posms: Izvēlieties saimniekdatora tīklu, kuru vēlaties paplašināt. Noklikšķiniet uz "Pieslēgt".
7. solis: Ievadiet uzņēmēja maršrutētāja bezvadu paroli.
Piezīme: Pārliecinieties, ka ievadītā bezvadu tīkla parole ir pareiza, pretējā gadījumā konfigurēšana nevar izdoties.
8. solis: Pielāgojiet WiFi nosaukumu (SSID) un paroli, kas ir tāda pati kā jūsu galvenajam tīklam.
9. solis: Noklikšķiniet uz "Save &; Apply', lai pabeigtu konfigurāciju.
10. solis: Atkārtoti pieslēdziet bezvadu ierīces jaunajam Wi-Fi tīklam.
Note:
Pēc konfigurēšanas piešķirtā IP adrese nebūs 192.168.10.254. Lai atkal pieteiktos pie Cudy Extender, apmeklējiet 'http://cudyre.net' vai atrodiet IP adresi maršrutētāja klientu sarakstā.
13 comments
@Dear Pernilla Staxered,
It is strange. What is the model and brand of the main WiFi device. I want to check it and try to test it. In addition, Please try to connect to the Range extender via cable, and login to the web page, go to “Generally Settings” -“Wireless” page to check the WiFi password. Is it correct.
If you can’t connect to the Range extender via cable, please reset it, then you can set it via the WEB page rather than the WPS button, Check if the problem fixed?
“Hello! We have bought a cudy extender and plugged it in by pressing wps on our router. The nerwork has full range and all the lights are on at the extender. However when we try to login at our iphone or television it says that we should use the same password as at the original router and it does not work. We have dubbelchecked many times. The name of the extender network is the same as the original network but ends with EXT5G or EXT2G.
It does not work with any of those two. Please help us.
Best regards, Pernilla”
@Dear mohammed widad,
The orange color means that the signal strength of the main WiFi at the location of the Cudy Range extender is not good. Is it possible to move closer to the main WiFi device to enhance the signal strength.
“I’ve finished all the configuration, but now I see the orange color in the wifi ?”
@Dear Mustafa,
If the Range Extender is working on range extender mode, the channel will be locked as the same with the main WiFi. You can’t change it.
“hi, I was wondering If I can change the channel manually”
Hello! We have bought a cudy extender and plugged it in by pressing wps on our router. The nerwork has full range and all the lights are on at the extender. However when we try to login at our iphone or television it says that we should use the same password as at the original router and it does not work. We have dubbelchecked many times. The name of the extender network is the same as the original network but ends with EXT5G or EXT2G.
It does not work with any of those two. Please help us.
Best regards, Pernilla
I’ve finished all the configuration, but now I see the orange color in the wifi ?