Cudy Whole Home Mesh sistēma ir izstrādāta, lai novērstu nedzīvās zonas un nodrošinātu nepārtrauktu Wi-Fi savienojumu visā mājoklī. Šis raksts sniegs jums norādījumus, kā soli pa solim izveidot tīklveida sistēmu.
Pierakstīšanās:
1. Pārliecinieties, ka jums pieder vismaz 2 Cudy produkti.
2. Visi Cudy produkti atbalsta tīkla tehnoloģiju: Home Mesh-Cudy oficiālā tīmekļa vietne
3. Programmatūra ir atjaunināta:
4. Ņemiet tās vienā telpā.
5. Atiestatiet visu Cudy produktu rūpnīcas noklusējuma iestatījumus. (Ieslēdzot strāvas padevi, nospiediet un turiet nospiestu RESET pogu ar tapu 6 s, pēc tam atlaidiet.)
6. Iestatiet galveno maršrutētāju un izveidojiet tā savienojumu ar internetu.
Nākumā kā piemēru ņemam M1800 un WR2100:
1. solis: Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1.
Sīkāku informāciju skatīt Kā pieteikties Cudy Router tīmekļa saskarnē?"
2. solis: Sistēmas statusa lapā noklikšķiniet uz pogas "+".
3. solis: Nospiediet WPS pogu uz M1800 un pēc tam nospiediet WPS pogu uz WR2100.
Galvenie tīkla bloki: Balta zibspuldze
Papildu tīklveida bloks: Mirgo pārmaiņus baltā un sarkanā krāsā
4. posms:Ieies "Skenēšana", pēc tam " Savienošana".
5. solis: Pagaidiet, līdz papildierīces maršrutētāja sistēmas indikators kļūst nepārtraukti zils, pēc tam pārvietojiet WR2100.
6. solis: gūstiet panākumus un izbaudiet tīkla tīkla darbību.
Piezīme:
1. 4/5G maršrutētāju var iestatīt tikai kā galveno tīkla vienību. Piemēram:
2. Jūs nevarēsiet pieteikties papildu tīkla maršrutētāja tīmekļa saskarnē. Ja vēlaties mainīt iestatījumus, noklikšķiniet uz "Sistēmas statuss"->"Mesh".
90 comments
@Dear Wilfredo，
Estimado Wilfredo:
Por favor, elige uno de los M3000 y configúralo como punto de acceso. Luego, conéctalo al router wifi principal. Además, puedes configurar el mismo SSID, tipo de cifrado (como WPA2-PSK/WPA3-SAE) y contraseña wifi. Funcionará como deseas.
“Tengo un router del proveedor que me genera una red wifi, tengo tres Cudy M3000 wifi y quiero por medio de cable ethernet repitan la red wifi del router del proveedor con el mismo nombre y la misma contraseña”
Tengo un router del proveedor que me genera una red wifi, tengo tres Cudy M3000 wifi y quiero por medio de cable ethernet repitan la red wifi del router del proveedor con el mismo nombre y la misma contraseña
@Dear John,
1. Please check if the Mesh system is installed. You can login to the web page of the main mesh router, check the “Mesh” status card.
2. If yes, please check the status page of the satellite mesh router. Check if the backhaul is Wired?
3. If the backhaul is wired, please try to change the cable between the two router. Do you connect them directly or there is a switch between them?
4. What is the firmware version of the two routers? Please update to the latest and check again.
“I have two WR11000s which I’m trying to use as a mesh. The main router is connected to 1 Gbps fibre WAN. The secondary router is connected to the main router by wired ethernet (cat 6 cable).
When I plug my laptop into the secondary router with ethernet, I get a great connection (~800+ Mbps, according to speedtest.net). When I connect to the secondary router by wifi, the connection is hopeless — even sitting my laptop right next to the router, I get speeds of just a couple of Mbps, and lots of drop outs. This happens on all bands (2/5/6 GHz).
When I am connected to the main router by wifi, it works fine.
Any suggestions as to what might be going wrong?
Thanks!"
I have two WR11000s which I’m trying to use as a mesh. The main router is connected to 1 Gbps fibre WAN. The secondary router is connected to the main router by wired ethernet (cat 6 cable).
When I plug my laptop into the secondary router with ethernet, I get a great connection (~800+ Mbps, according to speedtest.net). When I connect to the secondary router by wifi, the connection is hopeless — even sitting my laptop right next to the router, I get speeds of just a couple of Mbps, and lots of drop outs. This happens on all bands (2/5/6 GHz).
When I am connected to the main router by wifi, it works fine.
Any suggestions as to what might be going wrong?
Thanks!
@Dear Kamil,
I think the camera is connected to the 2.4GHz WiFi of the router. You can try to change the mode of 2.4GHz to 802.11b+g+n mode. Then check if the camera is able to connect to it?
“I built a mesh network using four WR3600E routers, and the internet works great. However, this network was meant for cctv monitoring, and that’s where the problem appeared: when the routers are in mesh mode, the cameras won’t log into the network, no matter which WPA level we choose. Only after disabling encryption and the password do the cameras connect to Wi-Fi. The cameras are XMeye. Is there any solution? When connected to lan port everything works. I’ll add that when the router is not in mesh mode, the same camera connects to it normally with wifi. Regards.”