"OpenWrt" programinės įrangos atsisiuntimas

Įspėjimai

Šiame tinklalapyje pateikiama prietaisų, palaikančių "OpenWrt" sistemą, programinė įranga, prieš atsisiųsdami ir įdiegdami programinę įrangą, atkreipkite dėmesį, kad "OpenWrt" projektas yra "Linux" operacinė sistema, skirta įterptiesiems prietaisams. Užuot bandžiusi sukurti vieną statišką programinę įrangą, "OpenWrt" pateikia visiškai įrašomą failų sistemą su paketų valdymu. Tai išlaisvina jus nuo gamintojo teikiamų programų pasirinkimo ir konfigūravimo ir leidžia naudojant paketus pritaikyti įrenginį taip, kad jis tiktų bet kokiai programai. Kūrėjams "OpenWrt" - tai sistema, leidžianti sukurti programą, nesukuriant aplink ją visos programinės įrangos; naudotojams tai reiškia galimybę visiškai pritaikyti įrenginį ir naudoti jį taip, kaip niekada nebuvo numatyta.

Aprašymas

  1. Šį failą galima naudoti tik tada, kai jūsų maršrutizatorius veikia su Cudy žiniatinklio vartotojo sąsaja.
  2. Jeigu maršrutizatorius jau veikia pagal "OpenWRT" vartotojo sąsają, naudotojas pirmiausia turėtų atkurti oficialią Cudy programinę įrangą. Tada atnaujinti maršrutizatorių su šia programine įranga.
  3. Kaip atkurti maršrutizatorių į oficialią Cudy programinę įrangą? Perskaitykite parsisiųstame faile esančią "readme" informaciją.

Garantija:

Cudy pareiškia

  1. Mes, Cudy, neprisiimame garantijos jokiai programinei įrangai, kurią išleido ne "Shenzhen Cudy Technology Co., Ltd."
  2. .
  3. Mes neprisiimame jokios garantijos produktams, kuriuose įdiegta bet kokia programinė įranga, kurios neišleido Shenzhen Cudy Technology Co, Ltd.
  4. .
  5. Jei jums reikia naudoti "openwrt" programinę įrangą, siūlome ją atsisiųsti iš oficialios Cudy svetainės.

Sisiųskite "OpenWrt" programinę įrangą, kad pašalintumėte parašo patikrą: Drive

ApenWrt firmware ieškiklis (neišleido Cudy): OpenWrt Firmware Selector

Back to blog

1466 comments

Hi, I have a Cudy WR3000 EU 1.0 router with serial number starting with 2451 running firmware 2.2.6 US. I would like to install OpenWRT. Can you provide me the intermediate firmware for my device?

By the way, is there any reason not to have it available in the Google Drive folder along with the other models?

Henrique

@Dear Christian Boettger,
For now, no, we can’t do this job currently.

“Hello,

is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?

Regards"

support

Hello,

is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?

Regards

Christian Boettger

Dear Sergey,
I am not sure about this. Please have a try.

“Hello. I have a WR3000S v.1 router (S/N S0007084261201121). I initially installed the transitional firmware `cudy_wr3000s-v1-sysupgrade_20251119.bin` from your website. Currently, I have `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-squashfs-sysupgrade.bin` installed, with 44 MB of available flash memory. Can I switch to the `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-ubootmod-squashfs-sysupgrade.itb` firmware to get 90+ MB of memory without risking damage to the router?
Thanks in advance.”

support

@Dear bulat,
Our technical support has sent you the firmware via email. Please check.

“Hello Cudy Support,

I have a Cudy WR3000H V1.0.

Serial number: S001004261804085 EU1.0
Current stock firmware: 2.4.5-20250515-105059

I would like to install official OpenWrt. Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0.

Thank you!"

support

Leave a comment