1. Atsisiųskite ir išpakuokite failą iš toliau.
2. Atsisiųskite naujausią programinę įrangą iš oficialios svetainės ir pervadinkite ją į "recovery.bin". Pastaba: ją turite įdėti į tą patį "Tftpd" įrankių failą.
3. Išjunkite maršrutizatorių. Atjunkite maitinimo adapterį arba paspauskite maitinimo mygtuką.
4. Prijunkite kompiuterį prie maršrutizatoriaus LAN prievado eterneto kabeliu.
5. Rankiniu būdu sukonfigūruokite kompiuterio IP adresą taip, kad jis būtų "192.168.1.88".
6. Paleiskite "tftp32.exe".
7. Komandinėje eilutėje paleiskite 'netsh advfirewall set allprofiles state off', kad išjungtumėte "Windows" ugniasienę, priešingu atveju tftp bus blokuojamas. Arba galite išjungti užkardą kompiuterio valdymo skydelyje. Kaip parodyta toliau.
8. Paspauskite "Reset" mygtuką / skylutę ir palaikykite. Prieš įjungiant maršrutizatorių ir prieš pradedant tftp atsisiųsti programinę įrangą, neatleiskite "Reset" mygtuko / skylutės.
9. Įjunkite maršrutizatorių.
10. Kai visos lemputės greitai mirksės arba kai tftp pradės atsisiųsti programinę įrangą, galite atleisti "Reset" mygtuką / skylutę.
11. Kai lemputė lėtai mirksi, atnaujinimas baigtas.
12. Atkurkite kompiuterio IP adresą, kad jis būtų dinaminis IP.
13. Atlikta.
143 comments
Hello
For Cudy X6 V2, I am having the same issue – invalid board info.
It doesnot allow any login or setup(effectively bricking the router).
Can you please outline the steps to recover from this situation.
Thank you
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!”
Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!
@Ahmad,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address”
Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address