PoE Accs.
POE20

High-Speed/Long-Range/Daisy Chain

Connect Further. Deploy Flexibly.

Choose High-Speed mode to extend PoE by 100 m, or Long-Range mode to reach up to 250 m by limiting the speed to 10 Mbps. Need more distance and high speed? You can add up to three extenders in a daisy chain to achieve a total extension of 300 m.

High-Speed/Long-Range/Daisy Chain

Connect Further. Deploy Flexibly.

Choose High-Speed mode to extend PoE by 100 m, or Long-Range mode to reach up to 250 m by limiting the speed to 10 Mbps. Need more distance and high speed? You can add up to three extenders in a daisy chain to achieve a total extension of 300 m.

Built for Consistent Networking 24/7

Shields Against Static Discharge

Dry office environment may harm the client with static discharge, and POE20 is equipped with level 3 ESD protection, handling 6kV contact and 8kV air ESD.

Tri-Level Devie Protections

Provide more reliable networking with short-circuit protection, overvoltage protection, and polarity protection.

High-Speed. Plug and Play.

Gigabit Speed

Provides super-fast bandwidth suitable for connecting multiple cameras, high-speed access points, speakers down the line.

Wall-Mount Ready

Installation is straightforward with no configuration required. Mounting screws are included in the box.

1 3

2 csatornás gigabites PoE++ jelerősítő

2 csatornás gigabites PoE++ jelerősítő, POE20 1.0

POE20 1.0

Egy 2 csatornás PoE jelerősítő, amely a PoE jelet 2 PoE vonalra osztja, és 100 méterrel növeli azok távolságát.

  • GbE bemenet, 2× GbE kimenet
  • 802.3bt/at/af bemenet
  • 2× 802.3at/af Max. 30 W kimenet 1
  • High-Speed/Long-Range Modes
  • High-Speed Extension up to 100 meters 2
  • 250 méteres átviteli távolság 3
  • Falra szerelhető
Minden részlet megtekintése
Modell verzió
Modell verzió POE20 1.0
Protocols
Protocols 802.3 Protocols
  • 802.3i 10 Mbps over Twisted Pair
  • 802.3u 100 Mbps over Twisted Pair
  • 802.3ab 1 Gbps over Twisted Pair
  • 802.3x Flow Control
  • 802.3af PoE
  • 802.3at PoE
  • 802.3bt PoE
PoE
PoE Uplink Stream 1× GbE, 802.3bt/at/af
Uplink PIN Assignment Mode A / Mode B / Four-Pair
Downlink Stream 2× GbE, 802.3at/af
Downlink Pin Assignment Mode A
Transimission Distance
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
  • Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating
Transimission Distance Note 250-meter transmission is only available under the Long-Range mode.
Interfaces
Interfaces Physical Buttons High-Speed/Long-Range DIP Switch
LED
  • PoE Status of Each PoE Port
  • Link/ACT of Each Ethernet Port
Power Interfaces PoE via Ethernet Port
Power
Power Power Methods
  • 802.3at/af PoE
  • 802.3bt PoE
Other Input Requirements ≥60W is recommended
Max Power Output 2× 30W
Max Power Output Note The actual power output depends on input
Max Power Consumption (W) 2W
Reliability
Reliability Power Protection
  • Polarity Protection
  • Overvoltage Protection
  • Short-Circuit Protection
  • Automatic Voltage Regulation
EMC IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
IEC/EN 61000-4-5, Level 3 Surge: RJ45: CM 2kV
Environment Ambient Operating Temperature: 0~40 ℃ (32~104 ℉)
Storage Temperature: -40~70 ℃ (-40~158 ℉)
Operating Humidity: 10%~95% non-condensing
Storage Humidity: 5%~95% non-condensing
Certifications
Certifications FCC, CE
Mechanical
Mechanical Install in a Daisy Chain Up to 3 extenders in a chain
Installation
  • Desktop
  • Wall-mount
Dimension 123×50×36 mm
4.84×1.97×1.42 inches
Casing Material Plastic
Product Weight 89.6 g (3.16 oz.)
Package Content
Package Content
  • POE20
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 128×56×45 mm
5.04×2.2×1.77 inches
Retail Package Weight 124.0 g (4.37 oz.)
Units per Carton 40
Carton Net Weight 5.0 kg (11.02 lbs)
Carton Gross Weight 5.4 kg (11.9 lbs)
Carton Dimension 28.1×25.5×24.7 cm
11.06×10.04×9.72 inches
  1. A ténylegesen rendelkezésre álló teljesítmény egyenlő a feltöltés teljesítményével, levonva a vonali veszteséget és az eszköz saját energiafogyasztását (lásd az energiafogyasztást a specifikációs lapon). Ajánlott olyan PoE switch használata, amely támogatja az IEEE PoE szabványt 54 V-on.
  2. A 100 méteres hosszabbítást a GbE kimenettől a kliens eszközökig mérik. A feltöltőkapcsoló és a GbE bemenet közötti szakaszt a feltöltőkapcsoló határozza meg.
  3. A sebesség 10 Mbps-ra lesz korlátozva Kiterjesztett/Nagy hatótávolságú módban.