Frissítés: 2025. december 24. Jó hír!
Az OpenWrt fórum egyesítette az új Flash F50L1G41LC-t támogató csomagot és az OpenWrt firmware 24.10.5-ös verzióra frissítését. Tehát, ha a jövőben letöltöd az OpenWrt firmware 24.10.5-ös vagy újabb verzióját a Cudy-hoz kapcsolódó modellek frissítéséhez, nem lesz probléma.
Fontos közlemény: 2025. november 24.
A 2025 novemberétől gyártott Cudy AX3000 sorozatú routerek (TR3000, az sorozatszám 2543-mal vagy újabbal kezdődik. A 2543 az sorozatszámban a 2025-ös év 43. hetét jelenti) az új F50L1G41LC flash memóriát használják. Az OpenWrt köztes firmware vagy az OpenWrt firmware régebbi verzióira való frissítés megakadályozza az eszköz indítását. Ezért új firmware-frissítéseket fogunk kiadni ezekhez a termékekhez a korlátozások bevezetése érdekében. Ha a rendszer észleli, hogy az eszköz az új Flash-t használja, akkor nem lesz képes frissíteni a régebbi, 2.3.X vagy korábbi firmware-verziókra. Ezenkívül a régebbi Flash-eszközökhöz korábban biztosított OpenWrt köztes firmware nem lesz kompatibilis.
Az érintett modellek a következők: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0 és WR3000P 1.0.
A Cudy kiadta az új OpenWrt köztes firmware-eket, amelyeket frissítettek a Google Drive-ra. Kérjük, váltson az új köztes firmware-re.
Az OpenWrt firmware-rel kapcsolatban továbbra is várunk a hivatalos OpenWrt fórumra, hogy kiadjon egy, az új Flash-sel kompatibilis OpenWrt firmware-t. A megjelenés után kérjük, használja az új OpenWrt firmware-t.
Ha az SN kód kisebb, mint 2543. A régi flash kártyát használja. Nincs ilyen probléma.
Figyelmeztetések
Ez a weboldal az OpenWrt rendszert támogató eszközök szoftvereit sorolja fel. A szoftver letöltése és telepítése előtt kérjük, vegye figyelembe, hogy az OpenWrt Project egy Linux operációs rendszer, amely beágyazott eszközöket céloz meg. Ahelyett, hogy egyetlen, statikus firmware-t próbálna létrehozni, az OpenWrt egy teljesen írható fájlrendszert biztosít csomagkezeléssel. Ez mentesíti Önt a gyártó által biztosított alkalmazáskiválasztás és -konfiguráció alól, és lehetővé teszi az eszköz testreszabását csomagok használatával, hogy az bármilyen alkalmazáshoz illeszkedjen. A fejlesztők számára az OpenWrt egy keretrendszer, amely lehetővé teszi egy alkalmazás létrehozását anélkül, hogy egy teljes firmware-t kellene köré építeni; a felhasználók számára ez a teljes testreszabás lehetőségét jelenti, az eszköz eddig elképzelhetetlen módon történő használatát.
Leírás
- Ez a fájl csak akkor használható, ha az útválasztó Cudy webes felhasználói felület alatt működik.
- Ha a router már működik OpenWRT felhasználói felület alatt, akkor először vissza kell állítani a hivatalos Cudy firmware-re. Ezután frissíteni kell a routert ezzel a firmware-rel.
- Hogyan lehet visszaállítani a router hivatalos Cudy firmware-jét? Kérlek, olvasd el a letöltött fájlban található readme fájlt.
Garancia:
Cudy ezennel kijelenti, hogy
- Mi, a Cudy, nem vállalunk garanciát olyan szoftverekre, amelyeket nem a Shenzhen Cudy Technology Co., Ltd. adott ki.
- Nem vállalunk garanciát azokra a termékekre, amelyekre nem a Shenzhen Cudy Technology Co., Ltd. által kiadott szoftvert telepítettek.
- Ha openwrt szoftvert kell használnod, azt javasoljuk, hogy töltsd le a Cudy hivatalos weboldaláról.
Töltsd le az OpenWrt firmware-t az aláírás-ellenőrzés eltávolításához:Hajtás
OpenWrt Firmware Finder (nem a Cudy adta ki):OpenWrt firmware-választó
1310 hozzászólás
@Dear Ask,
You can download the OpenWrt firmware via this link.
https://openwrt.org/toh/views/toh_fwdownload
Search the “Cudy TR3000”,
You will find the OpenWrt firmwares. Choose the v1(256MB) and download the Sysupgrade image. The download link is:
https://downloads.openwrt.org/releases/24.10.4/targets/mediatek/filogic/openwrt-24.10.4-mediatek-filogic-cudy_tr3000-256mb-v1-squashfs-sysupgrade.bin
“Subject: Request for a Signed Stable Release of OpenWrt Firmware for Cudy TR3000 (256MB Flash)
Dear Cudy OpenWrt Team,
I recently purchased a Cudy TR3000 device with 256MB of flash. The transitional OpenWrt firmware I downloaded from Google Drive turned out to be a snapshot build:
Firmware Version: OpenWrt 23.05-SNAPSHOT r23001+886-38c150612c / LuCI openwrt-23.05 branch git-24.148.43905-2891ca4 Kernel Version: 5.15.158
Because this is a snapshot version, I am unable to install the appropriate `kmod-mtd-rw` package. As a result, I cannot proceed with the steps described in the official guide: [https://openwrt.org/toh/cudy/tr3000](https://openwrt.org/toh/cudy/tr3000).
Could you please provide a signed, stable release of the OpenWrt firmware suitable for the Cudy TR3000 (256MB flash version)?
Thank you for your assistance.
Best regards,
ASK"
@Dear Shai,
It depends on the hardware version, If it is V1.0, yes it supports OpenWrt. But you need to know, the Flash is only 16MB. If it is V2.0, then no, there is no OpenWrt firmware for the router now. There is very little memory to install the plugins. I suggest other models such as WR3000H,WR3000E,WR3000S, TR3000 etc. The Flash is 128MB.
“I want to buy WR3000-IL. Does this router support OpenWRT?
See e.g. https://store.omc.co.il/items/6026987”
@Dear Ayrat,
1. What is the SN number of your router?
2. Please recover the firmware of your router to Cudy official firmware first. Please refer to this article on the website below.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=184fed77e&ss=r
Note: you need to download the latest firmware for your router via the link. Then unzip it and rename it to recovery.bin before recovering.
https://www.cudy.com/pages/download-center/wr3000h-1-0
For the OpenWrt firmware, we have submitted a patch to OpenWrt forum. But still need time to merge it. Here is the patch we submit. If you can build the OpenWrt firmware, you can pull the new code to develop the OpenWrt firmware for your self.
https://github.com/openwrt/openwrt/pull/18619
“Hello, the new Cudy WR3000h has a new memory chip. When I update the firmware to OpenWRT, the router stops turning on. Could you tell me where I can download a new version of OpenWRT for this router? Thanks in advance!”
Dear Cudy Team,
Thank you for the recent OpenWrt notice regarding the new Flash chip compatibility (SN 2543+). This information confirms the complexity of flashing your routers.
I am writing to urgently request public confirmation that your R&D team is integrating a fix for a severe and proven performance bug in the WR3000S (V1.0) Firmware 2.4.6. My support case, which includes the requested Diagnosis Bin File, has gone unanswered.
The Critical Issue:
Problem: When the 5GHz band is set to 80MHz Channel Width and 802.11ax mode, the download speed drops drastically to ~3.89 Mbps (I have provided all technical proof to support).
Technical Root Cause: This is a confirmed driver-level issue, specifically the RRM (Radio Resource Management) bug: kern.err kernel: [ 3964.022354] 7981@C00L1,RRM_PeerNeighborReqAction() 846: snprintf error!
Since you are already developing a mandatory new firmware update to handle the new hardware restrictions (as per your notice), please confirm that the fix for this critical RRM performance bug will be integrated into that very next official firmware release for the WR3000S.
The router is currently unusable in its high-speed advertised mode due to this persistent bug. Please provide a clear timeline (ETA) for the official patch.
Subject: Request for a Signed Stable Release of OpenWrt Firmware for Cudy TR3000 (256MB Flash)
Dear Cudy OpenWrt Team,
I recently purchased a Cudy TR3000 device with 256MB of flash. The transitional OpenWrt firmware I downloaded from Google Drive turned out to be a snapshot build:
Firmware Version: OpenWrt 23.05-SNAPSHOT r23001+886-38c150612c / LuCI openwrt-23.05 branch git-24.148.43905-2891ca4 Kernel Version: 5.15.158Because this is a snapshot version, I am unable to install the appropriate `kmod-mtd-rw` package. As a result, I cannot proceed with the steps described in the official guide: [https://openwrt.org/toh/cudy/tr3000](https://openwrt.org/toh/cudy/tr3000).
Could you please provide a signed, stable release of the OpenWrt firmware suitable for the Cudy TR3000 (256MB flash version)?
Thank you for your assistance.
Best regards,
ASK