WR21000
1.0
À venir

Version du modèle | ||
---|---|---|
Version du modèle | WR21000 1.0 | |
CPU | ||
CPU | CPU Details | 1.5 GHz Quad-Core CPU, ARM Cortex-A53 |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 1 GB (8 Gbit) DDR4 | |
Wireless | ||
Wireless | 6 GHz Wi-Fi Speed | 11520 Mbps |
5 GHz Wi-Fi Speed |
5765 Mbps (160 MHz) 8640 Mbps (240 MHz) |
|
2.4 GHz Wi-Fi Speed | 688 Mbps | |
6 GHz Wi-Fi Streams | 4T4R (4×4 MIMO) | |
5 GHz Wi-Fi Streams | 4T4R (4×4 MIMO) | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 8× Fixed | |
6 GHz Antenna Gain Max | 4dBi | |
5 GHz Antenna Gain Max | 4dBi | |
2.4 GHz Antenna Gain Max | 3.5dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 240 m (787 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | 10G SFP+ Slots | 1 |
2.5G RJ45 Ports | 4 | |
Ethernet Notes | The SFP+ slot is WAN/LAN configurable, 1× WAN port, and the rest ports are LAN ports. | |
USB-A 3.0 Ports | 1 | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC | 12V 3A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 3A DC |
|
Max Power Consumption (W) | 36W | |
Idle Power Consumption (W) | 15W | |
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation | Desktop |
Dimension |
Φ116×202 mm Φ4.57×7.95 inches |
|
Package Content | ||
Package Content |
|
|
Ordering Information | ||
Ordering Information | Retail Package Dimension |
1-Pack: 313×152×132 mm 12.32×5.98×5.2 inches |
Version du modèle | ||
---|---|---|
Version du modèle | WR21000 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 7 |
Max Wi-Fi Modulation | 4K-QAM | |
Wi-Fi Efficiency |
|
|
Max Wi-Fi Channel Width | 320 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz, 6 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | True | |
WAN Mode |
|
|
Internet Failover Sequence |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
USB Functions | Samba Server | |
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | Parental Controls |
|
All Devices Management |
|
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | True |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- Le débit réel des données sans fil varie en fonction des conditions du réseau, des limites du client et de facteurs environnementaux, notamment la disposition du bâtiment, les obstacles et l'emplacement du client.
- Les performances réelles de plusieurs appareils peuvent être affectées par les types d'applications utilisées, la bande passante totale disponible et les capacités de vos appareils. La connexion d’anciens appareils Wi-Fi (anciennes normes) peut réduire l’efficacité globale. L’utilisation des fonctionnalités d’efficacité nécessite des appareils clients compatibles qui prennent également en charge ces fonctionnalités. Trouvez plus d’informations sur les fonctionnalités d’efficacité prises en charge dans la section Logiciel de la feuille de calcul Spécifications.