Accessoires PoE
POE25

Conçu pour les environnements extérieurs difficiles

Protection CEM de niveau 3+

Maintenez votre connexion Internet grâce à une protection robuste. Protection contre les inversions de polarité, les surtensions, les courts-circuits et la régulation automatique de la tension.

Fonctionne à des températures extrêmes

Fonctionne à 70 °C (158 °F) et à froid (-20 °C / -4 °F), ce qui le rend adapté aux installations extérieures telles que les parkings, les ponts de croisière, les parcs nationaux, etc.

Haute vitesse. Plug and Play.

Vitesse Gigabit

Fournit une bande passante ultra-rapide adaptée à la connexion de plusieurs caméras, points d'accès haut débit et haut-parleurs sur toute la ligne.

Prêt pour montage mural

L'installation est simple et ne nécessite aucune configuration. Les vis de montage sont incluses dans la boîte.

FAQ

  1. What is a PoE Extender?
    A PoE Extender allows you to extend both power and data over Ethernet beyond the standard 100 m (328 ft) limit. It receives PoE input from a PoE switch or injector and outputs power and data to the next device or another extender.
  2. Can I connect a PoE Extender directly to a non-PoE switch?
    No. A non-PoE switch does not provide power through Ethernet.
    You must use a PoE injector between the switch and the extender to supply power if you do not have a PoE switch.
  3. My PoE Extender is not working. What should I check first?
    Please verify the following:
  • The upstream device (switch or injector) supports PoE or PoE+ (802.3af/at).
  • Non-PoE switches cannot power the extender.
  • The Ethernet cable is Cat5e or higher, in good condition, and under 100 m per segment.
  • The total chain length (from the switch to the final device) does not exceed the maximum supported distance.
  • The powered device (PD), such as a camera or AP, does not exceed the extender’s PoE output capacity.
1 2

Extendeur PoE Gigabit extérieur à 2 canaux

Extendeur PoE Gigabit extérieur à 2 canaux, POE25 2.0

POE25 2.0

Un prolongateur PoE à 2 canaux résistant aux intempéries qui étend la distance PoE de 100 m.

  • IP67, -20~70 °C (-4~158 °F)
  • Entrée GbE, 2x sorties GbE
  • Entrée 802.3bt/at/af
  • 2× 802.3at/af Sortie max. 30 W 1
  • High-Speed Extension up to 100 meters 2
  • Montage mural
Afficher tous les détails
Version du modèle
Version du modèle POE25 2.0
Protocols
Protocols 802.3 Protocols
  • 802.3i 10 Mbps over Twisted Pair
  • 802.3u 100 Mbps over Twisted Pair
  • 802.3ab 1 Gbps over Twisted Pair
  • 802.3x Flow Control
  • 802.3af PoE
  • 802.3at PoE
  • 802.3bt PoE
PoE
PoE Uplink Stream 1× GbE, 802.3bt/at/af
Uplink PIN Assignment Mode A / Mode B / Four-Pair
Downlink Stream 2× GbE, 802.3at/af
Downlink Pin Assignment Mode A
Transimission Distance
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating
Power
Power Power Input ≥60W is recommended
Max Power Output 2× 30W
Max Power Output Note The actual power output depends on input
Max Power Consumption (W) 2W
Reliability
Reliability Power Protection
  • Polarity Protection
  • Overvoltage Protection
  • Short-Circuit Protection
  • Automatic Voltage Regulation
EMC IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
IEC/EN 61000-4-5, Level X Surge: RJ45: CM 6kV
Grounding Methods Grounding Point
Environment Ambient Operating Temperature: -20~70 ℃ (-4~158 ℉)
Storage Temperature: -40~70 ℃ (-40~158 ℉)
Operating Humidity: 10%~100% non-condensing
Storage Humidity: 5%~95% non-condensing
Ingress Protection Rating IP67
Certifications
Certifications FCC, CE
Mechanical
Mechanical Install in a Daisy Chain Up to 3 extenders in a chain
Installation
  • Desktop
  • Wall-mount
Dimension 241×95×41.3 mm
9.49×3.74×1.63 inches
Casing Material Metal
Product Weight 324.0 g (11.43 oz.)
Package Content
Package Content
  • POE25
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 210×127×52 mm
8.27×5×2.05 inches
Retail Package Weight 521.5 g (18.4 oz.)
Units per Carton 20
Carton Net Weight 10.4 kg (22.93 lbs)
Carton Gross Weight 11.0 kg (24.25 lbs)
Carton Dimension 44.3×28.4×27.9 cm
17.44×11.18×10.98 inches
  1. The actual available power equals the uplink power minus the loss on the line and device’s own power consumption (see the power consumption in the spec sheet). A PoE switch that supports standard IEEE PoE standard at 54 V is recommended.
  2. 100m extension is measured from the GbE out to the client devices. The section between uplink switch and GbE In is determined by the uplink switch.