Update: December 24,2025 Good news!
The OpenWrt forum has merged the pacth which supports the new Flash F50L1G41LC and update the OpenWrt firmware to the version 24.10.5. So if you download the OpenWrt firmware version 24.10.5 or newer version in the future to update the Cudy related models. There will be no problem.
Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
1295 comentarios
@Dear Bayazit,
I think No. The reason is related to the driver of the main chip. It is not Open source. You can’t get it. We are not allowed to offer you this driver. May be in the future. The policy will change. But now, I think no possibility to do this.
“Will there be OpenWRT release for wr3000 v2.0 version? I guess that depends on if OpenWRT will start support your chip, and your dev team?
Moreover, stock firmware is openwrt based, I guess, as I get LuCi environment here.
If I can be any help to create openwrt firmware for these devices, I’ll be glad to provide assistance.”
Will there be OpenWRT release for wr3000 v2.0 version? I guess that depends on if OpenWRT will start support your chip, and your dev team?
Moreover, stock firmware is openwrt based, I guess, as I get LuCi environment here.
If I can be any help to create openwrt firmware for these devices, I’ll be glad to provide assistance.
@Dear Bayazit,
No, WR3000 V2.0 uses different chip model from the V1.0. There is no OpenWrt firmware for WR3000 V2.0. If you really need to update to the OpenWrt firmware. I suggest you change another model.
“Hi, wanted to check, if we can already install OpenWRT on cudy WR3000 v2, as the problem with new chip, as I suppose from update as of 24 dec, was solved and merged to 24.10 openwrt releases.
Can we expect intermediate firmware for these models?”
@Dear qiwei,
TR3000 256mb is not affected by the 2543 issue.
“I want to confirm if the TR3000 flash 256MB v1 intermediary file in google drive is updated, since my SN is 2550 (> 2543), so I need the updated intermediary file, but the one in google drive is udpated in May.
OR maybe the 256mb one is not affected by the 2543 issue?"
Hi, wanted to check, if we can already install OpenWRT on cudy WR3000 v2, as the problem with new chip, as I suppose from update as of 24 dec, was solved and merged to 24.10 openwrt releases.
Can we expect intermediate firmware for these models?