WB05 Kit 1.0

Muy pronto

Descripción general
Características
Especificaciones

Long-Range Connectivity

500 Meters PTP Wireless Connection

Designed to deliver stable PTP wireless connectivity up to 500 meters. Ideal for campuses, farms, and elevator surveillance PtP deployment. Supports up to 3× 8MP cameras at 500m.

Long-Range Connectivity

500 Meters PTP Wireless Connection

Designed to deliver stable PTP wireless connectivity up to 500 meters. Ideal for campuses, farms, and elevator surveillance PtP deployment. Supports up to 3× 8MP cameras at 500m.

Built for Outdoor Environment

IP55 Weather-Resistant Design

IP55-rated protection helps safeguard the device against dust and water jets for reliable outdoor deployment.

Built for Outdoor Environment

IP55 Weather-Resistant Design

IP55-rated protection helps safeguard the device against dust and water jets for reliable outdoor deployment.

Designed for Simple Deployment

Intuitive LED Design

Clear LED indicators show signal strength, Ethernet connection, and system status at a glance.

Auto Bridge Pairing

Pre-configured for automatic pairing. Power on and connect with minimal setup.

Easy Network Management with Cudy APP

Antenna Alignment

Built-in real-time signal strength visualization lets installers align remote radios precisely using just their smartphone.

Speed Test

One-tap throughput testing between linked radios. Instantly verify uplink/downlink rates and packet loss to confirm link performance.

Interference Detection

Automatic spectrum scanning detects co-channel and adjacent-channel interference and recommends the best available channel for a stable link.

Monitor & Configuration

Configure bridges and monitor link status remotely from Cudy APP.

1 6

500 Meters 2.4 GHz High-Power Wireless Bridge

500 Meters 2.4 GHz High-Power Wireless Bridge, WB05 Kit 1.0

WB05 Kit 1.0

Variantes de producto

A 2.4 GHz wireless bridge designed to deliver stable and long-range connectivity up to 500 meters. Ideal for campuses, farms, and elevator surveillance PtP deployment. Supports up to 3× 8MP cameras at 500m.

Wi-Fi de 300 Mbps ¹
7 dBi High-Gain Antennas
Beamwidth (H×V) 105° × 80°
DC, Passive PoE
Paso a través de PoE
IP55, -30~60°C (-30~140°F), 4kV Surge

Compatible accessories:

POE52-30W, POE24-12W, POE48-18W

Ver todos los detalles

Especificaciones del hardware

Especificaciones del software

Versión del modelo
Versión del modelo	WB05 Kit 1.0
CPU
CPU	CPU Details	580 MHz Single-Core CPU
Memory/Storage
Memory/Storage	Flash/ROM	8 MB (64 Mbit ) NOR
	DDR/RAM	64 MB (512 Mbit) DDR2
Wireless
Wireless	2.4 GHz Wi-Fi Speed	300 Mbps
	2.4 GHz Wi-Fi Streams	2 Spatial Streams
	Wi-Fi Antennas	2× Internal Directional
	Receive Sensitivity (Typical)	TBD
	FEM or PA/LNA	2.4 GHz: 2× Internal
	Beamwidth (H×V)	105° × 80°
	Range Performance	Max: 500 m (1640 ft)
Interfaces
Interfaces	10/100 Mbps RJ45 Ports	2
	Ethernet Notes	ETH0: PoE In, ETH1: PoE OUT* (See Power section)
Buttons and LEDs
Buttons and LEDs	LED	System, Signal Strength, Ethernet
	Physical Buttons	Reset Button, WPS Button
Power
Power	Power Input Type	DC Jack PoE via Ethernet Port
	Power Methods	DC Passive PoE
	Power Input	DC: 12V⎓1A Passive PoE: 12-57V⎓
	Power Output	802.3af at ETH1
	Max Power Consumption (W)	22W (with PoE output), 4.5W (without PoE output)
	Idle Power Consumption (W)	TBD
	Max Power Output (W)	15W
	Power Adapter In the Box	Input: 100-240V~, 50/60Hz Output: 12V⎓1A
	DC Plug Size (OD × ID)	5.50 ± 0.05 mm × 2.10 ± 0.05 mm
	Note	The PoE output requires a 48V passive PoE input and must be enabled on the configuration page. The bundled 12V power adapter is insufficient to power the PoE output.
Reliability
Reliability	Camera Capacity	500 m: 3× 8MP cameras
	EMC	IEC/EN 61000-4-2 ESD Level 4: Contact 8kV, Air 15kV IEC/EN 61000-4-5 Surge Level X: CM 6kV, DM 4kV
	Environment	Operating Temperature: -30 ℃ ~ 60 ℃ (-22 ℉ ~140 ℉) Operating Temperature with Normal Air Flow: -30 ℃ ~ 70 ℃ (-22 ℉ ~158 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Humidity: 5% ~ 90% non-condensing Storage Humidity: 0% ~ 100% non-condensing
	Ingress Protection Rating	IP55
Certifications
Certifications	FCC, CE
Mechanical
Mechanical	Installation	Wall-mount Pole-mount
	Dimension	179.7×37.2×44 mm 7.07×1.46×1.73 inches
Package Content
Package Content	WB05 Kit Power Adapter PoE Adapter Installation Guide Zip Tie
Compatibility
Compatibility	Compatible Accessories	POE52-30W 1.0, POE24-12W 1.0, POE48-18W 1.0
	Note	Choose with caution: Some suggested models may provide enough power for the device's own consumption but may be insufficient to support PoE Out.

Versión del modelo
Versión del modelo	WB05 Kit 1.0
Wireless
Wireless	Wi-Fi Standards	Wi-Fi 4
	Max Wi-Fi Modulation	64-QAM
	Wi-Fi Channel Width	Auto/20/40 MHz
	Wi-Fi Security	WPA/WPA2/WPA3
General
General	Operation Modes	PtP Base Station PtP Client
	Pre-Paired
Utilities
Utilities	Antenna Alignment
	Speed Test
System
System	LED Control
	Local Control Method	Config Web Page App Control
	Remote Control Method	App Control
	Firmware Upgrade	Local Update App (Over the Air) Online Update
	Reliability	Timed Reboot Backup and Restore
	Diagnostic Tools	Diagnosis
	Languages	English Bengali Catalan Czech German Greek Spanish French Hebrew Croatian Hungarian Italian Japanese Khmer Korean Dutch Norwegian Polish Portuguese Romanian Russian Slovak Swedish Thai Turkish Ukrainian Vietnamese Simplified Chinese Traditional Chinese
Dashboard
Dashboard	Panel	LAN Status System Version
	Charts	Throughput RSSI Latency

El rendimiento real de los datos inalámbricos variará como resultado de las condiciones de la red, las limitaciones del cliente y factores ambientales, incluida la distribución del edificio, los obstáculos y la ubicación del cliente.