Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
895 comentarios
@Mike,
Dear Customer,
Our technical support has sent you the intermediate firmware via email. Please check.
“Hi Team,
I wanted to download intermediary firmware from https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj for my WR3000 but Microsoft Defender recognized this file as a virus: “AndroidOS/ZkarletFlash” – can you elaborate on that please? Thank you."
Hi Team,
I wanted to download intermediary firmware from https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj for my WR3000 but Microsoft Defender recognized this file as a virus: “AndroidOS/ZkarletFlash” – can you elaborate on that please? Thank you.
@Michael,
Dear,
We have plan to develop the intermediate firmware in near future, please wait. I will send it to you when we done.
“Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks”
Hi,
I purchased the Cudy WR1300 one week ago. I have faced a lot of problems:
1. Overheating: It becomes too hot easily.
2. Bandwidth limit (QoS): It doesn’t allow me to set a kbps speed limit for clients. Even I can’t set a fractional number like 0.5 Mbps. The lowest value is 1 Mbps.
3. I couldn’t find the LED control feature; I find this disturbing while sleeping.
4. It has a simple app, which doesn’t have any special features like MAC filter or bandwidth control.
5. I have used a Tenda router for a long time. It had all the features and a beautifully easy-to-control interface. I could limit bandwidth from the same interface. I didn’t need to find the QoS or MAC filter option. Also, all the LED control, easy whitelist filtering, everything. Additionally, I used to receive regular updates. The router used to save offline device info as well.
I am using the latest version (v3) of the Cudy WR1300, firmware version 2.26. Now, what should I do?
Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks