Update: December 24,2025 Good news!
The OpenWrt forum has merged the pacth which supports the new Flash F50L1G41LC and update the OpenWrt firmware to the version 24.10.5. So if you download the OpenWrt firmware version 24.10.5 or newer version in the future to update the Cudy related models. There will be no problem.
Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
1511 comentarios
@Dear Arham,
There is no OpenWrt firmware for RE1200 currently. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)
Hello,
I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).
I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?
I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.
If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.
Thank you for your time.
Arham"
Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)
Hello,
I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).
I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?
I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.
If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.
Thank you for your time.
Arham
@Dear support,
If you have installed Mesh system with the router. You can’t update the firmware. Please power off the other Mesh device. Then reset this router to factory default. You can update this firmware before mesh system installed.
“Hello, I have Cudy M3000 v1. When trying to do local update – Im getting “File is not compatible with the device model(s).” Im doing something wrong?”
@Уважаемый Максим,
Нет, не поддерживает.
“Здравствуйте, поддерживает ли какую нибудь прошивку openwrt роутер cudy wr3000 процессор (Triductor TR6560P), если да, то подскажите какую?”
Hello, I have Cudy M3000 v1. When trying to do local update – Im getting “File is not compatible with the device model(s).” Im doing something wrong?