Cudy Whole Home Mesh system is built to eliminate dead zones and to provide uninterrupted Wi-Fi throughout your home. This article will guide you to build a mesh system step by step.
Preparation:
1. Ensure you own at least 2 Cudy products.
2. All Cudy products support mesh technology: Home Mesh-Cudy official website
3. Firmware is up-to-date: Download Center
4. Take them in the same room during configuration.
5. Reset all your Cudy products to factory default settings. (With the Power on, press and hold the RESET button with a pin for 6s, then release.)
6. Set up your primary router and make it connect to the internet.
Here we take M1800 and WR2100 as examples:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: On the System Status page, click on the "+" button.
Step 3: Press the WPS button on the M1800 and then press the WPS button on WR2100.
Main mesh unit: Flash white
Add-on mesh unit: Flash white and red alternately
Step 4: It will go to "Scanning", then " Connecting".
Step 5: Wait until the System LED of the add-on router turns into solid blue, then relocate WR2100.
Step 6: Success and enjoy the mesh network.
Note:
1. 4/5G router can only be set up as a Main mesh unit. For example:
2. You will not able to log into the web interface of the add-on mesh router. If you want to change settings, please click on "System Status"->"Mesh".
71 comentarios
I want to know if i buy 3x WR3000, if i can use them in MESH mode?
@Bruno,
Dear Bruno,
LT500 can only work as main mesh router. Can’t work as satellite mesh router. So you can’t install mesh system with them. Please return it and buy a new Cudy Wireless router,such as WR1300 to install mesh system.
“Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(”
Hello, I have a main LT500 configured, everything is OK. I just bought another one to extend wifi/cover . I tried a lot of times to add this new LT500 as a mesh (via the gui+wps buttons)…no discover…And I don’t want to use the WISP function because I want the same SSID and I want to use the mesh function…Can you help me ? Else, I’ll ask a refund for this 2nd LT500 :(
@Maciek
Dear Customer，
Thank you for contacting Cudy support team.
Sorry for the inconvenience caused to you! We have plan to add this feature next months via firmware update. It will come soon. Please wait patiently.
“The WR3600 router with the latest firmware does not have the Mesh WiFi feature.”
The WR3600 router with the latest firmware does not have the Mesh WiFi feature.