Only Cudy routers that have been upgraded to a firmware version that supports Cudy APP management can be managed using the APP.
Therefore, it is very likely that your Cudy router has not been upgraded to a firmware version that supports APP management.
You can download the Cudy APP by scanning the QR code below.
Please download the latest firmware version to upgrade.
Model: Cudy's wireless products will gradually release new firmware to support APP management. The following table lists some product models that already support APP. Other models may have been released. Please go to the download center to check the new firmware.
| WR1300 V2 & V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
Note: The firmware version of all the Cudy routers with 2.x.x will support Cudy APP management.
Please click here to feedback if you have any questions or advice when using Cudy APP.
39 comments
@Dear Golam,
Our technical support has contacted you via email. Please check.
“Cudy wr1300 v3 latest 2.4.4 firmware bugs in cudy app cloud management after bind
System logs:
Sat Jun 28 16:56:03 2025 user.err : [“?:0: attempt to index a nil value”]
Sat Jun 28 16:56:12 2025 user.notice cmsd: check bindtoken
Sat Jun 28 16:56:14 2025 daemon.crit cmsd: recv 15 signal
Sat Jun 28 16:56:14 2025 daemon.notice cmsd: stop cmsd
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.957707]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.957707] do_page_fault(): sending SIGSEGV to cmsd for invalid read access from 00000170
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.966288] epc = 00000170 in cmsd[400000+5000]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.970973] ra = 77530371 in libmosquitto.so.1[7752a000+1f000]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.977021]
Sat Jun 28 16:56:15 2025 daemon.notice cmsd: cmsd start
Sat Jun 28 16:56:22 2025 user.notice cmsd: start
Sat Jun 28 16:56:23 2025 daemon.notice cmsd: connect to mqtt server, Connection Refused: unknown reason.
Sat Jun 28 16:56:23 2025 daemon.notice cmsd: stop cmsd
Sat Jun 28 16:56:23 2025 daemon.err cmsd24413: Command failed: Unknown error”
Cudy wr1300 v3 latest 2.4.4 firmware bugs in cudy app cloud management after bind
System logs:
Sat Jun 28 16:56:03 2025 user.err : [“?:0: attempt to index a nil value”]
Sat Jun 28 16:56:12 2025 user.notice cmsd: check bindtoken
Sat Jun 28 16:56:14 2025 daemon.crit cmsd: recv 15 signal
Sat Jun 28 16:56:14 2025 daemon.notice cmsd: stop cmsd
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.957707]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.957707] do_page_fault(): sending SIGSEGV to cmsd for invalid read access from 00000170
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.966288] epc = 00000170 in cmsd[400000+5000]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.970973] ra = 77530371 in libmosquitto.so.1[7752a000+1f000]
Sat Jun 28 16:56:14 2025 kern.info kernel: [17706.977021]
Sat Jun 28 16:56:15 2025 daemon.notice cmsd: cmsd start
Sat Jun 28 16:56:22 2025 user.notice cmsd: start
Sat Jun 28 16:56:23 2025 daemon.notice cmsd: connect to mqtt server, Connection Refused: unknown reason.
Sat Jun 28 16:56:23 2025 daemon.notice cmsd: stop cmsd
Sat Jun 28 16:56:23 2025 daemon.err cmsd24413: Command failed: Unknown error
@Estimado Yonnel,
¿Cuál es la versión del firmware ahora?
“No puedo administrar mi router cudy AX1500 con la aplicación Cudy y intento actualizar el firmware 2025 y no lo admite dice formato de archivo inválido”
No puedo administrar mi router cudy AX1500 con la aplicación Cudy y intento actualizar el firmware 2025 y no lo admite dice formato de archivo inválido
@Dear Bartek,
Thank you for contacting Cudy support team.
If you want to use like this, please set it to the Access Point mode. Please follow the steps:
1. Disconnect the cable from your ISP router, connect the WAN port of WR3600 to your ISP router.
2. Disconnect and reconnect the phone to the router. Then you will be able to login in to the WEB page or see it in Cudy APP. Please set it to the Wireless Access Point mode. Then the router will disable NAT function. And you can also manage it via the APP or cudy.net.
“i dont see my brand new cudy wr3600 in app, nor in cudy.net, or even in 192.168.10.1,wifi and lan internet works, but i would like to acces config, i have connected it lan1-lan1 to my isp router/modem combo, and lan2 of cudy to my pc. i did it that way to not create double NAT, is it a problem? i would like it to stay in that config and still have access to admin panel”