1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comments
@Dear Angelos,
No matter. It is not a essential file.
“When downloading the Tftpd file, there are is no Readme.pdf file included. I don’t know if that is essential or if the Readme file contains just the above instructions but please let us know if we’re missing something here. Thank you.”
When downloading the Tftpd file, there are is no Readme.pdf file included. I don’t know if that is essential or if the Readme file contains just the above instructions but please let us know if we’re missing something here. Thank you.
@Dear Gleb,
Please describe the process in detail, I will check and try to find the solution.
In addition, what is the LED status when powering on the router, please record a video to show me.
“Hi, please help me. I followed all the steps and couldn’t recover my Cudy wr1300 v3. No firmware download process with tftpd 32 and 64, I tried lan and van ports.”
@Henry Corredor
Dear Customer，
Thank you for contacting Cudy support team.
Yes, the steps are the same. But you need to run a tftp server on the Linux or macOS system. You can google how to run tftp server on the Linux or macOS system.
“Hi everyone! Is a little troublesome for me to use Windows system. I would like to know if there is a way to make it with Linux or macOS system.”
Hi, please help me. I followed all the steps and couldn’t recover my Cudy wr1300 v3. No firmware download process with tftpd 32 and 64, I tried lan and van ports.