Cudy Whole Home Mesh system is built to eliminate dead zones and to provide uninterrupted Wi-Fi throughout your home. This article will guide you to build a mesh system step by step.
Preparation:
1. Ensure you own at least 2 Cudy products.
2. All Cudy products support mesh technology: Home Mesh-Cudy official website
3. Firmware is up-to-date: Download Center
4. Take them in the same room during configuration.
5. Reset all your Cudy products to factory default settings. (With the Power on, press and hold the RESET button with a pin for 6s, then release.)
6. Set up your primary router and make it connect to the internet.
Here we take M1800 and WR2100 as examples:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: On the System Status page, click on the "+" button.
Step 3: Press the WPS button on the M1800 and then press the WPS button on WR2100.
Main mesh unit: Flash white
Add-on mesh unit: Flash white and red alternately
Step 4: It will go to "Scanning", then " Connecting".
Step 5: Wait until the System LED of the add-on router turns into solid blue, then relocate WR2100.
Step 6: Success and enjoy the mesh network.
Note:
1. 4/5G router can only be set up as a Main mesh unit. For example:
2. You will not able to log into the web interface of the add-on mesh router. If you want to change settings, please click on "System Status"->"Mesh".
79 comments
@Dear Drew,
Thank you for your kindly advice. We will provide your feedback to the product department for evaluation.
“Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.”
Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.
@Dear Fazlee,
It is normal. m3000 will use the same channel as the main Wi-Fi when working on Range Extender mode. If you want it back. You can set it back to Wireless Router or Access Point mode.
“I have cudy m3000 v2 as wifi extender mode. I was able to change bands and channels from cudy router page but now I dont see the options to change bands anymore. Is anyone else having the same issue. I want the options back please cudy..”
I have cudy m3000 v2 as wifi extender mode. I was able to change bands and channels from cudy router page but now I dont see the options to change bands anymore. Is anyone else having the same issue. I want the options back please cudy..
@Dear Wilfredo，
Estimado Wilfredo:
Por favor, elige uno de los M3000 y configúralo como punto de acceso. Luego, conéctalo al router wifi principal. Además, puedes configurar el mismo SSID, tipo de cifrado (como WPA2-PSK/WPA3-SAE) y contraseña wifi. Funcionará como deseas.
“Tengo un router del proveedor que me genera una red wifi, tengo tres Cudy M3000 wifi y quiero por medio de cable ethernet repitan la red wifi del router del proveedor con el mismo nombre y la misma contraseña”