Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
895 comments
Any news regarding AP3000 v1? These access points are suitable for my company, but we cannot buy them until we can install OpenWrt without disassembling the device.
@Henry.
Dear Customer,
Thank you for contacting Cudy support team.
There is tftp64.exe tool in the package which may be detected as virus. Please check the intermediate firmware attached.
“Tried to download X6 V2. My computer flagged it as virus. Please advise”
Tried to download X6 V2. My computer flagged it as virus. Please advise
@Juan,
Dear Customer,
Thank you for contacting Cudy support team.
For now, the OpenWRT forum doesn’t release the OpenWRT firmware. So there is no need to offer the intermediate firmware to remove signature check. We will release the firmware after OpenWRT forum releases the OpenWRT firmware.
“Hi there!. The OpenWrt firmware to remove signature check is not available for WR3000H. I tried with WR3000 but does not work due to signature failure. There are a plan for this hardware?”
Hi there!. The OpenWrt firmware to remove signature check is not available for WR3000H. I tried with WR3000 but does not work due to signature failure. There are a plan for this hardware?