Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
895 comments
wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?
@Dear kjonca,
Our technical support has sent you the firmware via email. Please check.
“Hi. I want to test openwrt for LT400E v1 (https://github.com/openwrt/openwrt/pull/20660) could you provide firmware without signature checking?”
@Dear Jun,
1. Please recover the firmware to the Cudy official firmware. Here is the instruction attached. Please download the Cudy official firmware 2.4.7 or later, then rename it to the recovery.bin to recover. You can download the firmware on the website below.
https://www.cudy.com/pages/download-center/tr3000-1-0
2. We have changed the model of the flash in the router. So the old intermediate firmware and OpenWrt firmware for TR3000 1.0 will not work. Please use the new intermediate firmware.
3. You must use the OpenWrt firmware that has added the new patch, Or the OpenWrt firmware will not work. The patch is also attached. Some other customer has submit it to the OpenWrt project and developed new OpenWrt firmware. Please be careful. Update the new OpenWrt firmware with this patch.
“Hi Support team,
Could you send me the intermedia firware for TR3000 128MB, exiting one is not working, thanks.”
Hi. I want to test openwrt for LT400E v1 (https://github.com/openwrt/openwrt/pull/20660) could you provide firmware without signature checking?
Hi Support team,
Could you send me the intermedia firware for TR3000 128MB, exiting one is not working, thanks.