PoE Switch
GS1028EPS2

Reliable PoE for 24/7 Consistent Operation

IEEE 802.3at/af. Up to 30W Per Port.

Each PoE port delivers up to 30W of power, making it suitable for access points, IP cameras, digital signage, and most other PoE devices.

PoE Auto Recovery

Turn on the Watchdog function to monitor port activity. If a connected device freezes and stops transmitting data for 5 minutes, the Watchdog will automatically reboot the corresponding PoE port.

PoE Management

Configure power settings per port and take full control of PoE management, including Power On/Off, delay time scheduling, watchdog auto-recovery, PoE priority, and per-port power limits.

PoE Management

Configure power settings per port and take full control of PoE management, including Power On/Off, delay time scheduling, watchdog auto-recovery, PoE priority, and per-port power limits.

Web Configuration

Management Made Easy

Monitor port status, configure VLAN groups, LAG, DHCP, and more in the intuitive configuration page. The device also features SNMP to allow remote and centralized control.

Web Configuration

Management Made Easy

Monitor port status, configure VLAN groups, LAG, DHCP, and more in the intuitive configuration page. The device also features SNMP to allow remote and centralized control.

Secure and High-Performance Switching

802.1Q/MTU/Port-Based/Voice VLAN

802.1Q VLANs allows creating secure and high-performance network segments across different managed switches. The other MTU/Port-Based VLAN enable simpler local VLAN configuration.

DSCP/802.1p/Port-Based QoS

DSCP/802.1p QoS identifies DSCP packets in the tranmission and prioritize those latency-sensitive data.

Essential Management Features

Link Aggregation

Allows creating multiple LAG groups and multiply the transmission speed of the backbone in your networks.

DHCP Snooping

Assign an authorized DHCP server to prevent downtime when other rogue DHCP server connects into the network.

IGMP Snooping

Identifies the multicast groups connected to the switch and sends data to the exact ports instead of broadcasting them.

Loop Prevention

Automatically detects network loops and blocks affected ports. Supports STP/RSTP to ensure stable performance in large redundant networks.

Exceptional Built-Quality for Stable Operation

Build Robust Systems with Outstanding EMC

Improves service reliability and reduces downtime caused by power surges and ESD.

  • ESD: Contact 6kV; Air 8kV
  • Surge: Power DM 2kV, CM 4kV; RJ45 CM 4kV

Shielded Ports. Solid Metal Casing.

Ensures stable operation with Ethernet ports shielded with nickel-plated cooper alloy and robust SPCC metal casing.

Versatile Scenarios

Surveillance

Office Networking

Campuses Wi-Fi

Accesses and Signages

Mounting Bracket Included

Standard 19 inches width for rack installation.

Mounting Bracket Included

Standard 19 inches width for rack installation.

1 2

24-Port Gigabit Light Managed PoE+ Switch with 2 GbE and 2 Combo Ports

24-Port Gigabit Light Managed PoE+ Switch with 2 GbE and 2 Combo Ports, GS1028EPS2 1.0

GS1028EPS2 1.0

A rack-mounted PoE switch with a 300W power supply and management features.

  • 24× GbE with 802.3at/af PoE
  • 2× Uplink GbE + 2× Uplink Combo
  • 300W Power Supply
  • Per-Port PoE Management
  • Web Management, SNMP
  • VLAN, QoS, Port Trunk, etc
  • DHCP Snooping, IGMP Snooping
  • STP/RSTP, Loop Detection & Prevention
  • Smart Fan Cooling
  • Desktop, Rack-Mount
  • 440×220×44 mm (17.32×8.66×1.73")
View full details
Model Version
Model Version GS1028EPS2 1.0
Interfaces
Interfaces Gigabit RJ45/SFP Combo Ports 2
Gigabit RJ45 Ports 26
Gigabit RJ45 PoE Ports #1~#24
Max Power on a Single PoE Port 30W
PoE Port Notes The PoE ports comply with IEEE 802.3at/af standards.
PoE Priority Configurable. If no priority is configured, smaller-numbered ports have higher priority.
Shielded RJ45 Port True
Extend Mode Ports Configurable
VLAN Mode Ports Configurable
LED
  • Power
  • PoE Status of Each PoE Port
  • Link/ACT of Each Ethernet Port
  • PoE Max Status
Power Interfaces AC Inlet
Physical Buttons Reset Button
Physical Buttons Note The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Customize the wait time in the web management to prevent damaging clients with online auto-upgrade feature.
Performance
Performance Copper Speed and Distance
  • Cat. 3 or higher cable: 100 meters at 10 Mbps
  • Cat. 5 or higher cable: 100 meters at 100 Mbps
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
Optical Spec and Distance Depends on the Installed Optical Module
MAC Address Table 8192
Max Switching Capacity 56 Gbps
Max Forwarding Rate 41.664 Mpps
Jumbo Frame 15 KB
Packet Buffer 4 Mbit
Power
Power Power Methods AC
Power Input 100-240V~ 50/60Hz
Power Supply 300W
Max Power Excluding PoE 20W
Switching
Switching 802.3 Protocols
  • 802.3x Flow Control
  • 802.3i 10BASE-T
  • 802.3u 100BASE-TX
  • 802.3ab 1000BASE-T
  • 802.3z 1000BASE-X
  • 802.3az Power Saving
  • 802.3af PoE
  • 802.3at PoE
802.1 Protocols
  • 802.1d: STP
  • 802.1w: RSTP
  • 802.1p: LAN Layer 2 QoS/CoS
  • 802.1q: VLAN Bridge Operation
  • 802.1ab: LLDP/LLDP-MED
Port Management
  • Port On/Off
  • Port Negotiation Speed
  • Port Trunk (Static Aggregation)
  • Port Mirror
  • Data Rate Limit
  • Jumbo Frame Settings
  • Storm Control
  • Traffic Monitor
  • MAC Address Management
  • EEE (802.3az)
PoE Management
  • PoE Priority
  • PoE Watchdog On/Off
  • PoE Watchdog Period/Packet Threshhold
  • PoE Consumed Power
  • PoE Standard
  • Delayed PoE Delivery
  • Total PoE Power Limit
  • PoE Power Limit
Port Mirror Sessions 4
Port Trunk Groups 4
Max Port Num per Port Trunk Group 8
L2 Features
  • IGMP Snooping
  • Loop Prevention
  • DHCP Snooping
  • STP/RSTP
  • LLDP Config and Neighbors
  • MTU VLAN
  • Port-Based VLAN
  • 802.1Q VLAN
  • Voice VLAN
  • DSCP QoS
  • 802.1p QoS
  • Port-Based QoS
Reliability
Reliability Fans 1
Fan Note Smart Cooling: The fan speed adjusts in real time based on power consumption.
Grounding Methods
  • Three-Prong Plug
  • Grounding Point
EMS IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
Environment Operating Temperature: 0~40 ℃ (32~104 ℉)
Storage Temperature: -40~70℃ (-40~158 ℉)
Operating Humidity: 10~90% non-condensing
Storage Humidity: 10~95% non-condensing
System
System Control Methods
  • Config Web Page
  • SNMP V1/V2
Firmware Upgrade Local Upgrade
Reliability Backup and Restore
Diagnostic Tools
  • Cable Status/Length Diagnosis
  • Ping
Languages
  • English
  • Bengali
  • German
  • Spanish
  • French
  • Portuguese
  • Russian
  • Arabic
  • Indonesian
  • Hindi
  • Urdu
  • Traditional Chinese
  • Simplified Chinese
Mechanical
Mechanical Dimension 440×220×44 mm
17.32×8.66×1.73 inches
Product Weight 2941.2 g (103.75 oz.)
Casing Material Metal
Installation
  • Desktop
  • Rackmount via Brackets
Package Content
Package Content
  • GS1028EPS2
  • Power Cord
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 487×307×84 mm
19.17×12.09×3.31 inches
Retail Package Weight EU: 3670.0 g (129.46 oz.)
Units per Carton 5
Carton Net Weight EU: 18.4 kg (40.57 lbs)
Carton Gross Weight EU: 19.4 kg (42.77 lbs)
Carton Dimension 51×44.3×32.5 cm
20.08×17.44×12.8 inches