Amazon A+ Content
| Model Version | ||
|---|---|---|
| Model Version | AP3600 Wall 1.0 | |
| CPU | ||
| CPU | CPU Details | 2.0 GHz Quad-Core |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 512 MB (4 Gbit) DDR3 | |
| Wireless | ||
| Wireless | MLO Speeds | 3570 Mbps |
| 5 GHz Wi-Fi Speed | 2882 Mbps | |
| 2.4 GHz Wi-Fi Speed | 688 Mbps | |
| 5 GHz Wi-Fi Streams | 3 Spatial Streams | |
| 2.4 GHz Wi-Fi Streams | 2 Spatial Streams | |
| Wi-Fi Antennas | 5× Internal | |
| FEM or PA/LNA | 5 GHz: 3× Internal, 2.4 GHz: 2× Internal | |
| Beamforming | ||
| Range Performance |
Max: 180 m (591 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
| Interfaces | ||
| Interfaces | 2.5G RJ45 Ports | 2 |
| Gigabit RJ45 Ports | 3 | |
| Ethernet Notes | ETH0: PoE In, LAN1: PoE OUT* (*See Power Section) | |
| Buttons and LEDs | ||
| Buttons and LEDs | LED | System |
| Physical Buttons | Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi) | |
| Power | ||
| Power | Power Input Type | PoE via Ethernet Port |
| Power Methods |
|
|
| Power Input |
|
|
| Power Output | PoE on LAN1: PoE Passthrough (the output voltage equals the input voltage range 42.5–57V) | |
| Max Power Consumption (W) | 12W (48V PoE) | |
| Idle Power Consumption (W) | 5W (48V PoE) | |
| Max Power Output (W) | 13.5W | |
| Note | The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page. | |
| Reliability | ||
| Reliability | Advanced | Hardware Watchdog |
| EMC | ESD: Contact: 4kV; Air: 8kV | |
| Environment |
Operating Temperature: 0 ℃ ~ 40 ℃ (14 ℉ ~149 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation | Wall-mount |
| Dimension |
143×86×27.6 mm 5.63×3.39×1.09 inches |
|
| Package Content | ||
| Package Content |
|
|
| Ordering Information | ||
| Ordering Information | Retail Package Dimension |
152×39.5×90 mm 5.98×1.56×3.54 inches |
| Units per Carton | 30 | |
| Carton Dimension |
32.8×22×29.6 cm 12.91×8.66×11.65 inches |
|
| Compatibility | ||
| Compatibility | Compatible Products | C200P 1.0, C500P 1.0 |
| Compatible Accessories | POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0 | |
- Actual wireless data throughput will vary as a result of network conditions, client limitations, and environmental factors including building layout, obstacles, and client location.
- Cudy AP Controller is required to enable this feature.
- The wireless coverage claim serves as a reference only. Coverage performance will vary due to environmental factors including building layout, obstacles, traffic volume and density, and device location. For optimal coverage, please place the device in a central location within the area requiring Wi-Fi.
- Actual performance for multiple devices may be affected by the types of applications used, the total available bandwidth, and the capabilities of your devices. Connecting older Wi-Fi devices (legacy standards) may reduce overall efficiency. Using efficiency features requires compatible client devices that also support those features. Find more information about supported efficiency features in the software section of the Specs spreadsheet.