1. Download the latest firmware from Download Center.
2. Unzip the file you download
3. Power ON Cudy device, wait for LED become solid.
4. Connect to Cudy’s network via WiFi or Ethernet.
5. Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
6. Upgrade the firmware.
a. Advanced Settings -> Firmware, Choose the firmware you unzipped to upload.
b. General Settings->Firmware page can do online upgrade and Local update.
Note: Only Firmware 2.x.x or above support.
7. Waiting 5 minutes for the router restart.
129 comments
Hola !!!
queria saber si se puede usar firmware Cudy en otros dispositivos
por ej tplink TL-Mr6400 v5
lo tengo con openwrt pero m da error el wireguard VPN
@Estimado JOSE:
1. ¿Cuál es el modelo de su router? Puede consultar el modelo en la etiqueta situada en la parte inferior del router.
2. ¿Cómo conecta el router? ¿Conecta el puerto WAN del router Cudy al dispositivo anterior (como el ONT o el módem)?
3. ¿Qué ha configurado en el router?
4. ¿Cuál es el estado de Internet de su router?
“No puedo compartir WiFi”
No puedo compartir WiFi
“@Dear Dom,
Please download the firmware version 2.3.0 or 2.3.1, there is an intermediate firmware in the package. You must update the intermediate firmware first. Then update the new 2.3.x firmware.”
I tried this and it doesn’t work, I have already intermediate firmware installed, when I try to update to 2.3.x it always failed, after it failed I have to unplug power cable (because wifi is not working, cable connection is ok) then plug again and router still have intermediate firmware version. Please provide to us proper fix, changing browser/computer does not resolve the problem.
“@Dear Dom,
Please download the firmware version 2.3.0 or 2.3.1, there is an intermediate firmware in the package. You must update the intermediate firmware first. Then update the new 2.3.x firmware.”
I tried this and it doesn’t work, I have already intermediate firmware installed, when I try to update to 2.3.x it always failed, after it failed I have to unplug power cable (because wifi is not working, cable connection is ok) then plug again and router still have intermediate firmware version. Please provide to us proper fix, changing browser/computer does not resolve the problem.