What is Access Point Mode?
Access Point mode is the router uses a wired connection to the primary router or modem router to expand the wireless coverage for a home network.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose 'Wireless Access Point', then click 'Next'.
Step 3: Choose your 'Time Zone'.
Step 4: Confirm the hardware connection.
Step 5: Change the wireless network name and password.
Step 6: Click "Save & Apply" to complete the configuration.
Step 7: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
Note:
After setting up the Cudy router into Access Point mode, the IP address will be assigned by the host router and the default IP Address 192.168.10.1 will not able to log in. If you need to log into Cudy router again, type 'http://cudy.net' into your browser or look up the Cudy router's IP address in your main (primary) router's client list.
56 comments
Vraiment c’est aujourd’hui j’ai tester cudy pour la première fois mais j’ai été royalement déçu.
Modèle : ac 1200
Peut importe le mode que je choisis et je configure c’est la page captif de cudy qui vient et demande mot de passe avant de passer la main au portail captif de mikrotik
J’ai passé toute la journée a tester tous les mode possible !!!!
@Rob,
Yes, we have this plan. We have developed the Multi-SSID function now. But VLAN function are still in development.
“Hi all,
have a quick Question, you have Businiess AP´s like the AP3000 which is pretty nice, that are not to be capable of VLANs and or multiple SSIDs? Or do you have a roadmap when implemented? without this features is just a home AP”
Hi all,
have a quick Question, you have Businiess AP´s like the AP3000 which is pretty nice, that are not to be capable of VLANs and or multiple SSIDs? Or do you have a roadmap when implemented? without this features is just a home AP.
@Dear Tolotra,
For Cudy routers, the WAN port will work as LAN port if you set it to AP mode. Please have a try.
“Why not letting the wan port usable in AP mode, 3 ports is very handicapping”
Why not letting the wan port usable in AP mode, 3 ports is very handicapping