How to configure USB Sharing on Cudy router?

The USB sharing feature allows you to share a USB storage device that’s connected to the router to other wired or wireless users on the same network.

Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Use "admin" as password to log in.
For details, please refer to How to log into the web interface of Cudy Router?

Step 2: Click Advanced Setting on the top, then click USB Sharing in the Network section.

Step 3: Switch Enable to on. Input the password in the Password filed. This password is only valid when the user wants to access the USB Storage device.

Step 4: Click Save & Apply to complete the settings.

Step 5: After setting up , you can visit the USB storage via following address according to your system OS. If the default LAN IP has been changed, you should change the IP Address to the new one.

Windows:        \\cudy.net or \\192.168.10.1
MacOS smb:   //cudy.net or smb://192.168.10.1
Linux smb:       //cudy.net or smb://192.168.10.1
Back to blog

28 comments

@Support,
Firmware version: 2.3.2-20241226-105607
Hardware: WR1300S V1.0

Maybe WR1300S in AP mode cannot provide USB sharing service?

Dmitry

@Dear Dmitry,
What is the firmware version of your WR1300S?
“I am using two WR1300S as access points to my network (and R700 as a router). I turned on USB sharing in WR1300S`s web interface but cannot access usb not using \\ or \\\ in File Explorer (Windows)… What am I doing wrong?”

Support

I am using two WR1300S as access points to my network (and R700 as a router). I turned on USB sharing in WR1300S`s web interface but cannot access usb not using \\ or \\\ in File Explorer (Windows)… What am I doing wrong?

Dmitry

@Dear hancuo
你好,非常感谢您的宝贵建议,我已经转给我们负责产品功能规划的同事了。

“您好,请问可不可以增加FTP协议的文件共享功能?SMB功能太单一了,而且也不好给不同 的账户划分不同的权限。谢谢!”

Support

您好,请问可不可以增加FTP协议的文件共享功能?SMB功能太单一了,而且也不好给不同 的账户划分不同的权限。谢谢!

hancuo

Leave a comment