Warnungen
Auf dieser Webseite wird die Software von Geräten aufgeführt, die das OpenWrt-System unterstützen. Bitte beachten Sie vor dem Herunterladen und Installieren der Software, dass es sich bei OpenWrt Project um ein Linux-Betriebssystem für eingebettete Geräte handelt. Anstatt zu versuchen, eine einzelne, statische Firmware zu erstellen, bietet OpenWrt ein vollständig beschreibbares Dateisystem mit Paketverwaltung. Dies befreit Sie von der vom Anbieter bereitgestellten Anwendungsauswahl und -konfiguration und ermöglicht Ihnen, das Gerät durch die Verwendung von Paketen an jede Anwendung anzupassen. Für Entwickler ist OpenWrt das Framework zum Erstellen einer Anwendung, ohne eine komplette Firmware darum herum erstellen zu müssen; Für Benutzer bedeutet dies die Möglichkeit einer vollständigen Anpassung, um das Gerät auf eine Art und Weise zu nutzen, die nie vorstellbar war.
Beschreibung
- Diese Datei kann nur verwendet werden, wenn Ihr Router unter der Cudy-Web-Benutzeroberfläche funktioniert.
- Wenn der Router bereits unter der OpenWRT-Benutzeroberfläche funktioniert, sollte der Benutzer ihn zuerst auf die offizielle Cudy-Firmware wiederherstellen. Und aktualisieren Sie dann den Router mit dieser Firmware.
- Wie kann ich den Router auf die offizielle Firmware von Cudy zurücksetzen? Bitte lesen Sie die Readme-Datei in der heruntergeladenen Datei.
Garantie:
Cudy erklärt hiermit
- Wir, Cudy, übernehmen keine Garantie für Software, die nicht von Shenzhen Cudy Technology Co., Ltd. veröffentlicht wurde.
- Wir übernehmen keine Garantie für Produkte, auf denen Software installiert ist, die nicht von Shenzhen Cudy Technology Co., Ltd. freigegeben wurde.
- Wenn Sie OpenWRT-Software verwenden müssen, empfehlen wir Ihnen, diese von der offiziellen Website von Cudy herunterzuladen.
Laden Sie die OpenWrt-Firmware herunter, um die Signaturprüfung zu entfernen: Drive
OpenWrt Firmware Finder (nicht von Cudy veröffentlicht): OpenWrt-Firmware-Auswahl
904 Kommentare
@Dear Marek M.
Thank you for contacting Cudy support team. Thank you for your kindly advice. We will provide your feedback to the product department for evaluation. I think we will do better about this.
“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”
@cruday,
Our technical support has sent you the firmware via email. Please check.
“hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work”
@Dear Luis,
Our technical support has contacted you via email. Please check.
“Hi, Thank you for the fast answer.
Already flashed the file indicated (2.0) and it keeps saying the same… FILE IS INVALID… Any idea?
Thanks in advance.”
Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!
hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work