Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
83 comments
@Michael,
Dear,
We have plan to develop the intermediate firmware in near future, please wait. I will send it to you when we done.
“Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks”
Hi,
I purchased the Cudy WR1300 one week ago. I have faced a lot of problems:
1. Overheating: It becomes too hot easily.
2. Bandwidth limit (QoS): It doesn’t allow me to set a kbps speed limit for clients. Even I can’t set a fractional number like 0.5 Mbps. The lowest value is 1 Mbps.
3. I couldn’t find the LED control feature; I find this disturbing while sleeping.
4. It has a simple app, which doesn’t have any special features like MAC filter or bandwidth control.
5. I have used a Tenda router for a long time. It had all the features and a beautifully easy-to-control interface. I could limit bandwidth from the same interface. I didn’t need to find the QoS or MAC filter option. Also, all the LED control, easy whitelist filtering, everything. Additionally, I used to receive regular updates. The router used to save offline device info as well.
I am using the latest version (v3) of the Cudy WR1300, firmware version 2.26. Now, what should I do?
Hi Cudy support, i’m interrested too in runing openwrt on my ap3000 ceiling ap, tested this build and it boot very long over uart, but after it loads it works very well, and now i want to flash it thru web panel, when we get transit firmware? Thanks
@Konrad,
Dear,
Thank you for contacting Cudy support team.
I will follow this when we back to office.
“Hello Cudy!
I’m also looking forward to openwrt intermidiate for AP3000 v1 indoor. Is there any chance for this?”
Hello Cudy!
I’m also looking forward to openwrt intermidiate for AP3000 v1 indoor. Is there any chance for this?