Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Use "admin" as password to log in.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: Click Advanced Setting on the top, then click USB Sharing in the Network section.
Step 3: Switch Enable to on. Input the password in the Password filed. This password is only valid when the user wants to access the USB Storage device.
Step 4: Click Save & Apply to complete the settings.
Step 5: After setting up , you can visit the USB storage via following address according to your system OS. If the default LAN IP has been changed, you should change the IP Address to the new one.
Windows: \\cudy.net or \\192.168.10.1
MacOS smb: //cudy.net or smb://192.168.10.1
Linux smb: //cudy.net or smb://192.168.10.1
40 comments
我尝试了一下。恰恰相反，当U盘为NTFS时显示未连接，为exFAT时反而读到了，奇怪的是，我的256G的U盘一直是NTFS
@Dear xie,
没有限制容量，可能和存储格式有关，你可以试试格式化成NTFS格式看看效果、
“TR3000 USB文件共享对插入的U盘有大小限制吗？64GB的U盘就显示未连接，256GB就显示已连接”
TR3000 USB文件共享对插入的U盘有大小限制吗？64GB的U盘就显示未连接，256GB就显示已连接
@Dear Pavlo,
You need to know that the server is a SAMBA server, not the FTP server, You can try to use \\85.238…. to access the SAMBA server.
“The FTP server’s IP address is 192.168.10.1.
The WR1300S’s local network IP address is 192.168.10.1.
I’ve set up port forwarding: Port forwards – TCP/UPD – WAN – 445 – 192.168.10.1 – 445.
Any ideas?”
How to access a router’s FTP server from the Internet?