Cudy Home  ꄲ  Access Points  ꄲ  Outdoor AP  ꄲ  Outdoor AC1200 Wireless Access Point,Model: AP1200 Outdoor
ꁆ ꁇ

Outdoor AC1200 Wireless Access Point,Model: AP1200 Outdoor

  •  

     

    Speedy Dual-Band AC1200 Wi-Fi

    With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.

    Boosted Wi-Fi Coverage with Beamforming

    Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.

     

     

    Guide to Wiring and Physical Installation

    10/100M Port with Passive PoE

    PoE Adapter included in package (Non-waterproof)—

    ● 24 V Passive PoE (Max power: 12 W, Idle: 2.5 W)

    Mounting Kit Included

    A mounting kit is included in the box, supporting—
    ● Wall-Mounting
    ● Pole-Mounting

     

     

    Specifications

     

    Hardware Features Highlights CPU: 580 MHz Processor
    Flash: 8 MB (64 Mbit)
    DDR: 64 MB (512 Mbit)
    Interface 1× 10/100Mbps Ethernet (RJ-45) Port (Support Passive PoE)
    1× Reset Button
    1× WPS Button
    Power Supply 24 V Passive PoE (+4,5pins; -7,8pins)
    Dimensions ( W×D×H )

    AP Body: 240×100×53.7 mm 
    Antennas: 197.5×21.6×15.5 mm 

    Height of AP with Antennas installed: 438 mm
    Antenna Type

    2× Detachable Omni-directional Antennas
    Mounting Pole/Wall Mounting (Kit included)
    Wireless Function Wireless Standard:

    Wi-Fi 5 (802.11ac/n/g/b/a)
    Frequency: 5 GHz, 2.4 GHz
    Signal Rate:  5 GHz: Up to 867 Mbps
    2.4 GHz: Up to 300 Mbps
    Bandwidth 20/40/80 MHz
    Wireless Functions Multiple SSID
    Enable/Disable Wireless Radio
    Transmit Power Control 
    QoS (WMM)
    Band Steering
    MU-MIMO
    Beamforming
    Rate Limit
    Reboot Schedule
    Wireless Schedule
    Wireless Encryption WPA-PSK
    WPA2-PSK
    WPA-PSK/WPA2-PSK
    Security Access Control
    Mac Filtering
    Wireless Isolation Clients
    Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions)
    Lightning Protection

    4 KV Lightning/Surge protection at the Ethernet port
    ESD 8 KV Contact / 15 KV Air ESD protection
    Working Temperatures

    -20/60°C

    Extend -40/65°C (Booted up in advance. Performance may drop slightly.)
    Operating Mode Access Point Mode
    Router Mode
    RE Mode
    WISP Mode
    Package Contents Outdoor Wireless Access Point
    2× Detahcable Wi-Fi Antennas
    24 V Passive PoE Adapter
    Mounting Kits
    Installation Guide
    Environment Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F)
    Storage Temperature: -40–70 °C (-40–158 °F)
    Operating Humidity: 10–90% RH non-condensing
    Storage Humidity: 5–90% RH non-condensing
    System Requirements

    Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux

     

●  AC1200 Dual Band MU-MIMO Wi-Fi 
●  MT7628DA+MT7613B
●  4-In-1: AP/RE/Router/WISP
●  1× 10/100M WAN/LAN Port
●  WPS Button, Reset Button
●  24V Passive PoE (PoE Adapter included)
●  IP65, -20~60°C (Ext. -40~65 °C), 8/15 KV Contact/Air ESD + 4 KV Surge/Lightning Protection