Home Page | Cudy  ꄲ  Access Points  ꄲ  Outdoor AP  ꄲ  Outdoor AX3000 High-Power Wi-Fi 6 Access Point, Model: AP3000 Outdoor
ꁆ ꁇ

Outdoor AX3000 High-Power Wi-Fi 6 Access Point, Model: AP3000 Outdoor

  •  

    Super-Fast, Super-Efficient AX3000 Wi-Fi 6

    Wi-Fi 6 with the highest 160 MHz channel width and 1024-QAM modulation provide up to 3 Gbps total throughput. OFDMA and MU-MIMO work on uplink plug download directions allowing it to connect over 100 devices while minimizing latency. (Max 512 devices)

    Five PA and Antennas for High-Power Wi-Fi Coverage

    Equipped with five power amplifiers and an advanced 3+2 antenna structure, this AP delivers top-notch capabilities to navigate its signal through physical obstacles, providing extraordinary Wi-Fi coverage performance for a larger area.

     

     

    Plug-and-Play Mesh Installation

    Simply Plug and Unplug for Mesh Setup

    Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)

    Leave the Rest to Adaptive Routing

    Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.

     

    Guide to Wiring and Physical Installation

    Gigabit Port with Two PoE Options

    Supports two powering methods—
    ● 802.3at PoE (Max power: 18 W, Idle: 5 W)
    ● 48-57 V Passive PoE (Adapter included, not waterproof)
    If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.

    Mounting Kit Included

    A mounting kit is included in the box, supporting—
    ● Wall-Mounting
    ● Pole-Mounting

     

     

    Specifications

     

    Hardware Features Highlights CPU: 1.3 GHz Dual-Core ARM Cortex-A53 CPU
    Flash: 128 MB (1 Gbit)
    DDR: 256 MB (2 Gbit)
    Interfaces 1× Gigabit Ethernet Port (PoE-In)
    1× Reset Button
    1× WPS Button
    Power Supply 802.3at PoE
    48-57 V Passive PoE (+4,5pins; -7,8pins)
    Dimension (W×D×H)

    AP Body: 240×100×53.7 mm 
    Antennas: 197.5×21.6×15.5 mm 

    Height of AP with Antennas installed: 438 mm
    Antenna Type

    2× Detachable Omni-directional Antennas
    Mounting Pole/Wall Mounting (Kit included)
    Wireless Function Wireless Standard Wi-Fi 6 (802.11ax/ac/n/g/b/a)
    Frequency 5 GHz, 2.4 GHz
    Signal Rate: 5 GHz: Up to 2402 Mbps
    2.4 GHz: Up to 574 Mbps
    Bandwidth 20/40/80/160 MHz

    Wireless Functions

    (Features with * require a Cudy AC as the gateway. Cudy AC is coming soon)

    (Features with ** require a Cudy WR1300/WR3000 or Cudy AC as the gateway)

    		 Fast Roaming
    Multiple SSID *
    Captive Portal **
    Self-Organizing Mesh
    Band Steering *
    Auto Channel Optimization *
    Enable/Disable Wireless Radio 
    Transmit Power Control 
    QoS (WMM)
    MU-MIMO 
    Beamforming
    Rate Limit
    Reboot Schedule
    Wireless Schedule
    Wireless Encryption WPA-PSK
    WPA2-PSK
    WPA-PSK/WPA2-PSK
    WPA3-SAE
    WPA2-PSK/WPA3-SAE
    Security Access Control
    Mac Filtering
    Wireless Isolation Clients
    VPN Server and Client Zerotier, Wireguard, OpenVPN, IPSec, L2TP, PPTP
    DNS over TLS Cloudflare, Google, Quad9
    Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions)  
    Lightning Protection

    6 KV Lightning/Surge protection at the Ethernet port

    		  
    ESD 8 KV Contact / 15 KV Air ESD protection  
    Working Temperatures

    -20/60°C

    Extend -40/70°C (Booted up in advance. Performance may drop slightly.)

    		  
    Operating Modes Access Point
    Wi-Fi Router
    Range Extender
    WISP
    Mesh
    Package Content Outdoor Wireless Access Point
    2× Detahcable Wi-Fi Antennas
    Passive PoE Adapter
    Mounting Kits
    Installation Guide
    Environment Operating Temperatures: -40~65 °C (-4~149°F) ext. -40~70 °C (-40~158°F)
    Storage Temperature: -40–70 °C (-40–158 °F)
    Operating Humidity: 10–90% RH non-condensing
    Storage Humidity: 5–90% RH non-condensing
    System Requirements

    Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux

     

     

●  AX3000 Wi-Fi 6
●  Five Independant PA for High-Power Coverage
●  Hardware Watchdog Improves Reliability
●  MT7981
●  1× Gigabit WAN/LAN Port
●  WPS Button, Reset Button
●  802.3at/af PoE or 48~57 V Passive PoE
●  MU-MIMO/OFDMA
●  IP65, -40~65°C (Ext. -40~70 °C)
●  8/15 KV Contact/Air ESD + 6 KV Surge/Lightning Protection