Home Page | Cudy  ꄲ  SMB  ꄲ  PoE Accessories  ꄲ  POE Extender  ꄲ  4-Channel Gigabit POE+ Extender, Model: POE40
ꁆ ꁇ

4-Channel Gigabit POE+ Extender, Model: POE40

  • 60W Power budget & 30W Maximum One Port

    Supports 60W total PoE power and up to 30W for one PoE port.Auto detect power device; will not burned non-standard PoE device or normal PoE switch. Complies with IEEE802.3af/at Standard

    Gigabit Switching Performance

    The switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, each cudy switch supports up to 5 Gbps with a switching capacity of 10 Gbps

    Plug&Play, Fanless design

    Plug and Play, Easy of use.Fanless design for silent operation.Made of high-quality metal case, sturdy and durable with long service life, provide better heat dissipation, suitable for most environment. Pin assignment, Mode A: 1/2(+),3/6(-)

    Surveillance

    Works with IP Cameras for home and office, small business

    VoIP Conference Call

    Works with VoIP phones for business conference

    Wi-Fi Coverage

    Works with WiFi APs for office and business

     

     

     

    Specification

     

     

    Model POE40
    No. of channels 1(PoE IN) into 4(PoE OUT)
    Pass Through Data Rates 10/100/1000 Mbps half/full duplex
    Power over Ethernet input Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 4/5 (+), 7/8 (-)
    Power over Ethernet Output

    Pin Assignment and Polarity: 1/2 (+), 3/6 (-)

    Output Power: up to 12W for 4 PSE or 30W for 2 PSE
    Indicators LED indicators are located on the RJ45 connector

    Power indicator: PoE enabled

    Powered success:Power

    Network indicator: Link/Act
    Connectors Shielded RJ-45, EIA 568A and 568B
    Network cables Shielded category 5E (or higher)
    Dimensions 119mm x 85mm x 28mm
    Mounting Wall of shelf
    Environment Indoor
    Environmental Conditions Operating Ambient Temperature: 0 to 45℃

    Operating Humidity: Maximum 90%, Non-condensing

    Storage Temperature:-40 to 70℃

    Storage Humidity: Maximum 95%, Non-condensing
    Regulatory Compliance IEEE 802.3af (15.4W)

    IEEE 802.3at (30W)

    IEEE802.3at 4Pairs(60W)

     

     

● IEEE802.3af/802.3at/802.3bt compliant
● One gigabit PoE input port (60 watts max)
● Four gigabit PoE output ports (30 watts max per port)
● Extends PoE signal for additional 100 meters 
● No additional power supply required
● Automatically detects PoE and Non-PoE equipments
● Desktop or wall-mount installation
● Metal case, plug and play