Wersja modelu | ||
---|---|---|
Wersja modelu | M11000 1.0 | |
CPU | ||
CPU | Chipset | Qualcomm IPQ5322 |
CPU Details | 1.5 GHz Quad-Core CPU | |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 512 MB (4 Gbit) DDR4 | |
Wireless | ||
Wireless | 6 GHz Wi-Fi Speed | 5760 Mbps |
5 GHz Wi-Fi Speed | 4320 Mbps | |
2.4 GHz Wi-Fi Speed | 688 Mbps | |
6 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 6× Fixed | |
6 GHz Antenna Gain Max | 5dBi | |
5 GHz Antenna Gain Max | 5dBi | |
2.4 GHz Antenna Gain Max | 5dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 260 m (853 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | 2.5G RJ45 Ports | 4 |
Ethernet Notes | 1× WAN port, the rest are LAN ports | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC | 12V 2A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 2A DC |
|
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation | Desktop |
Dimension |
Φ116×202 mm Φ4.57×7.95 inches |
|
Package Content | ||
Package Content |
|
Wersja modelu | ||
---|---|---|
Wersja modelu | M11000 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 7 |
Max Wi-Fi Modulation | 4K-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 768 | |
Recommended Client Upper Limit | 300 | |
Max Wi-Fi Channel Width | 320 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz, 6 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | true | |
WAN Mode |
|
|
Internet Failover Sequence |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | All Devices Management |
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | Local Control Method |
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- Actual wireless data throughput will vary as a result of network conditions, client limitations, and environmental factors including building layout, obstacles, and client location.
- Actual performance for multiple devices may be affected by the types of applications used, the total available bandwidth, and the capabilities of your devices. Connecting older Wi-Fi devices (legacy standards) may reduce overall efficiency. Using efficiency features requires compatible client devices that also support those features. Find more information about supported efficiency features in the software section of the Specs spreadsheet.