How to configure Cudy Range Extender via web interface
Common network topology:
Step 1: Plug the Range Extender into the wall socket and wait until the Power light is Stable on.
Note:
1. When you set up the Range Extender, take it closer to your host router.
2. RESET the Range Extender to default settings to avoid interfaces.
Step 2: Connect to the Range Extender's default Wi-Fi which is open Wi-Fi.
Step 3: Launch a web browser, and enter http://cudyre.net/ or http://192.168.10.254/ in the address bar. Use admin as the password to log in.
Step 4: The Quick Setup window will pop up, choose "Wireless Extender", then go "Next".
Step 5: Choose your "Time Zone".
Step 6: Select the host network you want to extend. Click on "Connect".
Step 7: Enter the host router's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot succeed.
Step 8: Customize the WiFi name (SSID) and the password is the same as your host network.
Step 9: Click "Save & Apply" to complete the configuration.
Step 10: Reconnect your wireless devices to the new Wi-Fi network.
Note:
After configuration, the IP address will be assigned by the host router, and the usual IP 192.168.10.254 will not be available for login. If you need to log into Cudy Extender again, type "http://cudyre.net" into your browser or look up the Cudy Extender's IP address in your host router's client list.