Version du modèle | ||
---|---|---|
Version du modèle | AP3000D 1.0 | |
CPU | ||
CPU | Chipset | MT7981 |
CPU Details | 1.3 GHz Dual-Core, ARM Cortex-A53 | |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 16 MB (128 Mbit) NOR |
DDR/RAM | 256 MB (2 Gbit) DDR3 | |
Wireless | ||
Wireless | 5 GHz Wi-Fi Speed | 2402 Mbps |
2.4 GHz Wi-Fi Speed | 574 Mbps | |
5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) with an Extra Stream | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 4× Fixed | |
5 GHz Antenna Gain Max | 5.3dBi | |
2.4 GHz Antenna Gain Max | 5.3dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 220 m (722 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | Gigabit RJ45 Ports | 1 |
Ethernet Notes | Accepts PoE powering | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack, PoE via Ethernet Port | |
Power | ||
Power | Power Methods |
|
DC | 12V 1.5A | |
Passive PoE | 12 ~ 57V | |
Power Adapter |
AP3000D | DC Adapter in the box: Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 1A DC AP3000D_P | PoE Adapter in the box: Input: 100 ~ 240 V, 50/60 Hz AC Output: 24V Passive PoE |
|
Max Power Consumption (W) | 12 W (48 V PoE) 12 W (DC) | |
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation |
|
Dimension |
183.3×109×38 mm 7.22×4.29×1.5 inches |
|
Package Content | ||
Package Content |
|
|
Ordering Information | ||
Ordering Information | Retail Package Dimension |
330×256×60 mm 12.99×10.08×2.36 inches |
Units per Carton | 10 | |
Carton Dimension |
52.8×31.7×34.7 cm 20.79×12.48×13.66 inches |
Version du modèle | ||
---|---|---|
Version du modèle | AP3000D 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 6 |
Max Wi-Fi Modulation | 1024-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 512 | |
Recommended Client Upper Limit | 300 | |
Max Wi-Fi Channel Width | 160 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Multi-SSID (Max Number) | TBD | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | true | |
WAN Mode |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | Captive Portal | True |
VPN Server |
|
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | All Devices Management |
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | ture |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
|
General | ||
General | Internet Failover Sequence |
|
- Le débit réel des données sans fil varie en fonction des conditions du réseau, des limites du client et de facteurs environnementaux, notamment la disposition du bâtiment, les obstacles et l'emplacement du client.
- La déclaration de couverture sans fil sert uniquement de référence. Les performances de couverture varient en raison de facteurs environnementaux, notamment la disposition du bâtiment, les obstacles, le volume et la densité du trafic, ainsi que l'emplacement de l'appareil. Pour une couverture optimale, veuillez placer l'appareil dans un emplacement central dans la zone nécessitant une connexion Wi-Fi.